Hi Scott, Don't know if they are exactly the KK type but I had found the one you mentioned in the Jameco Catalog. The RC-85 J3 connector is 14 pins while the J4 connector is 8 pins. I was hoping to do it all in one connector each but finding the exact 8 & 14 pin units is not easy.
I'll try Digi-Key and Mouser... thanks much. cheers skipp > Scott Zimmerman <n3...@...> wrote: > > Skipp, > > I *thought* these were KK series Molex plugs that fit .1" header pins. I > don't remember off-hand how many pins are needed for each, but try molex > #22-01-2xxx. I am looking in the Jameco catalog and a 10 position > version is a 22-01-2107. > > Here is Mouser catalog page 1450. It shows all different types: > http://www.mouser.com/catalog/catalogUSD/638/1450.pdf > I *think* your looking for figure 'A'. > > Digikey has them too: > http://dkc3.digikey.com/PDF/B092/P0181.pdf > This is Page 181. Page 182 has more. > > These are just the housings, you'll need to order the pins separate. > > If you are looking to go from .1" header to a terminal block type > interface, you're on your own. I made an adapter board one time that > brought the pins out to terminal strips for easy connectivity. > > Scott > > Scott Zimmerman > Amateur Radio Call N3XCC > 474 Barnett Road > Boswell, PA 15531 > > > skipp025 wrote: > > re: ACC Controller Power & I/O Connector Part Numbers? > > > > Anyone have a current source and part number(s) for the > > ACC RC-85 Repeater Controller logic and power jacks/plugs? > > > > thanks in advance for your replies. > > > > cheers, > > s. > > > > > > > > ------------------------------------ > > > > > > > > Yahoo! Groups Links > > > > > > > > > > ------------------------------------------------------------------------ > > > > > > No virus found in this incoming message. > > Checked by AVG - www.avg.com > > Version: 8.5.375 / Virus Database: 270.13.1/2211 - Release Date: 06/30/09 > > 11:37:00 > > >
