Hi Jim, I have used a directional coupler to get a received signal into the system, but have too many adapters on it to make it work right!
The repeater is a Motorola Quantar, so there shouldn't be any problem in the split size. I can have one antenna on the tower, but not two, so I gotta make it work! Thanks, Tim W5FN --- In [email protected], James Lee <moto_t...@...> wrote: > > Have you checked the repeater for desense without the antenna installed? As > in most commercial repeaters they are usually designed for larger spacing > than 600 kHz. Check it without the antenna and all open ports terminated with > a 50 ohm termination. Then add the antenna and look at the difference. I have > had problems where I had to split the transmit and receive to two different > antennas and split the duplexers accordingly. > > I also chased this down once to a cheap right angle connector, the > manufacturer used a spring to make the turn and it made a neat detector!..Jim >
