I should have elaborated when I recommended the 3/8. I use a heat gun to make the jacket a little more pliable. Works great.
Chris Kb0wlf -snip- > For 3/8" Superflex, the OD of the cable shield is just a tad too big to > screw into a PL-259 easily, so I take a drill bit and shave off the > tips of > the threads inside the PL-259 so the cable goes in easy, then solder on > as > you normally would. > > I never came up with a solution I liked for putting 1/2" Superflex > connectors on a regular PL-259, so when I'm forced to use PL-259's I > usually > go with 1/4" or 3/8" 'flex or buy a real Andrew connector. > > --- Jeff WN3A > > -snip-
