Give me an email address and I will send you the info. I have complete set of manuals. I have 6 of these in the field working. They are great repeaters. They give me very little trouble.
--- In Repeater-Builder@yahoogroups.com, "tait700" <cscan...@...> wrote: > > --- In Repeater-Builder@yahoogroups.com, "ki4vdp" <ki4vdp@> wrote: > > > > > > Hello Chris, > > What model T-800 repeater are you working with. I should be able to help > > you. > > Gary > > Thanks Gary, > > The Module is T856 UHF 400-512mhz. > I assume that the Gnd in the Mic goes to the shield on the plug but i am a > little dubious about taking a chance with the other two terminals. > This module is not mine and letting the smoke out if i get it wrong could be > a little embarrassing :-) > > Thanks for your reply, > > Regards, > > Chris S. > > > > > > > > > > > > > > > > > --- In Repeater-Builder@yahoogroups.com, "tait700" <cscannel@> wrote: > > > > > > Hello, > > > Was wondering in anyone has come across a Diagram of how a Normal Tait > > > mobile radio Fist mike is modified to operate with the above Tx repeater > > > module ? > > > > > > The normal mobile Tait mic is terminated in a 6p6c plug and in the T800 > > > version it is connected to a 6.5mm stereo plug that suits the socket on > > > the face of the Tx module. > > > > > > I assume that the internal wiring of the Mic is the same and that the > > > three connections, ( Gnd, Mic, PTT ) are connected to the appropriate > > > terminals on the plug. > > > > > > Any info would be most appreciated, > > > > > > Regards, > > > > > > Chris S. > > > > > >
