Hey guys did this site change? I looked it up and it was there, checked it again all I see is ads.
73 JIM From: [email protected] [mailto:[email protected]] On Behalf Of D. Daniel McGlothin, KB3MUN Sent: Thursday, September 03, 2009 7:19 PM To: [email protected] Subject: Re: [Repeater-Builder] COR board for simple repeater?? Perhaps I'm misunderstanding what you are looking for. The bottom two images at <http://www.hs9dmc.com/repeater/vox/handy-to-handy_kitchen-house.htm> seem to show the two HTs linked by the dual circuit shown on the page using the speaker and mic jacks. A different circuit shown on <http://www.hs9dmc.com/repeater/repeater_handy2way.htm> appears to be wired directly to the HT circuit boards. 73 de Daniel KB3MUN gervais wrote: > Well Daniel > it helped me a lot > i can see the little interface between the 2 portable radios > it is what i need,but he is not using the 2 connectors on the radio, > the mic and speaker > > ???? > > thanks > gervais ve2ckn > > > -------------------------------------------------- > From: "D. Daniel McGlothin, KB3MUN" <[email protected] <mailto:kb3mun%40mcglothin.us> > > Sent: Thursday, September 03, 2009 7:19 AM > To: <[email protected] <mailto:Repeater-Builder%40yahoogroups.com> > > Subject: Re: [Repeater-Builder] COR board for simple repeater?? > > >> Azman may have been referring to this link for HT to HT: >> >> http://www.hs9dmc.com/repeater/vox/handy-to-handy_kitchen-house.htm >> >> The schematic and pictures transcend the language barrier. >> >> The second grouping from the bottom seems to be the collection of >> repeating interfaces. Hovering the mouse over the links will show the >> link name in the status bar. From that, you can determine the content >> of the other links in the group. >>
