no mods required, other than tuning. I have 2 on 441, both pout out rated
power. check the regulated 12 volts to the tripler, the molex plugs on the
interface board tend to be intermittent and /or resistive...
the exciter board should be making about 350mw to 500 mw..if working correctly.
lance n2HBA
----- Original Message -----
From: w7nikw7nik
To: [email protected]
Sent: Wednesday, September 16, 2009 10:30 PM
Subject: [Repeater-Builder] Micor Station question
I have a micor station 450-470 . I have .019 watts out the exciter after
the 1st band pass tfd6373a. The tripler needs modified. The test meter 5 output
is 34ma. Where can I find the mods for the tfe6153a tripler?
The transmit freq is 441.850, I tried 445.550 element 1 watt with out tunning
. I have narrowed it down to the tripler . Should I add some more wire to the
turns on the 2nd band pass ?? Any help would be great .
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.409 / Virus Database: 270.13.101/2376 - Release Date: 09/16/09
11:21:00
