Thnx:) That worked and was super easy to do. NOW! How can i dissable the damn speaker since the volume dont seem to have a 0 setting?
--- In [email protected], Doug Bade <k...@...> wrote: > > The vol high point on the 13 pin aux I/O strip is probably capable of > putting out what you need... You can find it on the power > supply/interface board. Option plug J905 I think..Pin P2-11 of that > connector... > > See LBI38389b at repeater builder. > http://www.repeater-builder.com/ge/lbi-library/lbi-38389b.pdf > > See this pdf on it's site or RB site....for the system board itself > http://www.ve3fyn.ca/files/lbi-31924%20uhf%20systemf.pdf > > > External decoders and remotes pull audio from this point. although it > somewhat filtered, it is pretty close to buffered discriminator...if > it is not suitable you will need to tack solder to something just > after the discriminator IC.. and that area is pretty tight to work in... > > > The RF board is almost identical in all these 800 models...of the TMX > line... here is the PDF link of the rf board... > > http://www.repeater-builder.com/ge/lbi-library/lbi-38866.pdf > > after looking at the schematic on page 8... I would still recommend > the vlo sq hi point as I indicated above.... > > Doug > KD8B > > > > At 04:42 PM 9/28/2009, you wrote: > > > > > >Hey group > > > >Does anyone know the points to put a discriminator tap on a TMX8810/8825? > > > > >
