I googled WACOM 604 duplexer and came up with a bunch of info., you might try the same. I found a 2 page WACOM 604 flyer with the specs says the A,B and C cans are 80" tall, and the D can is 72" tall. Logic would say shorten the inner rod 8", but loop size might be smaller and the harness cables may be different length as well. LOL on your project. Hope some one else has more info to help you out.
Doug N3DAB --- In [email protected], "ag4uw" <ag...@...> wrote: > > Hello group!! I am looking for someone that has info on mods for the wacom > 604B duplexers to put them in the ham band 604D. And does anyone know how to > remove the the tuning rod from the wacom duplexers??? Does the big nut on the > top unscrew or can it be removed??? I am looking for info but have not been > able to find anything on doing this mod. If I can remove the copper rod from > the can I was going to try to cut it shorter,(If you know how long the tuning > rod is on the D model please let me know. It can not be cut off from the end > because it has finger stock on that end and will have to be cut off at the > top. If anyone has any info please let me know. if you have the info on how > long to cut the tunning rod off are know how long the tuning rod is on the > 604D or have any info on how to remove the rod please let me know. any info > you may have would be great. Thanks Freddy N4XW >
