Do you have the programmer interface? The GX3000 was programmed by programming a ROM segment resident on the 8749 (if I remember correctly) microprocessor. You remove the uProc. (socketed) and plug it into either the standalone programmer or an interface box connected to a PC with the proper software. If it were me, I'd try to find a two way shop that still has the programmer or, if you expect to program it ofter or have multiple radios, I'd look for a stand alone programmer. It programmed through a keypad on the box. That same setup will also program the HX400 series handhelds and a few other older Standard radios. Tom DGN
--- In [email protected], "w9nwn" <d...@...> wrote: > > Just checking to see if anyone might have a copy of the programming software > for the old Standard GX-3000 series of radios. I can get my hands on a E-prom > burner and even a old computer to run the software on but need the software > first. Otherwise I will just use the mfor door stops. > > Thanks, > > Doug W9NWN >
