Hi Martin, perhaps the repeater keeper of GB3VI can be of assistance to you:
http://www.repeaters.pwp.blueyonder.co.uk/index_files/Page406.htm <http://www.repeaters.pwp.blueyonder.co.uk/index_files/Page406.htm>73 de Darren G7LWT 2009/12/2 cruizzer77 <atlant...@gmx.ch> > > > I'm collecting info about using a Tait T800 series 1 low band repeater as a > ham 6m repeater, but info is very scarce. I do not own such a repeater yet > but know where I'd get one in case I see that there is some hope for > success. > > These are the problems one will most likely run into: > > First of all the factory software to generate the hex files is very > stubborn and refuses to generate files for out of band frequencies. The > factory frequency range is 66-88 MHz while I'd need it between 51 and 52 > MHz. BTW I only have the old dos software as the newer windows version is > nowhere to be found. > > Second the hardware may need some tweaking, but to what extent? > > Furthermore I have not found the manuals for the T825 (RX), T827 (Exciter) > and T828 (PA) modules. > > I'd appreciate if those who know these repeaters could say a few words > about it. Thanks guys. > > 73 de Martin HB9TZW > > >