Thanks Eric, maybe I will suggest to Batlabs that a note would be appropriate before someone used the pins as numbered.
73 JIM KA2AJH From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Eric Lemmon Sent: Sunday, December 20, 2009 3:27 PM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] Maxtrac five pin Connector Jim, The problem here is that the pin numbers shown on the schematic diagram in the MaxTrac manual are not in their physical order. In fact, the pins are numbered 1-2-3-4-5, with Pin 1 closest to the side of the radio. 73, Eric Lemmon WB6FLY -----Original Message----- From: Repeater-Builder@yahoogroups.com <mailto:Repeater-Builder%40yahoogroups.com> [mailto:Repeater-Builder@yahoogroups.com <mailto:Repeater-Builder%40yahoogroups.com> ] On Behalf Of James Sent: Sunday, December 20, 2009 11:57 AM To: Repeater-Builder@yahoogroups.com <mailto:Repeater-Builder%40yahoogroups.com> Subject: [Repeater-Builder] Maxtrac five pin Connector On batlabs http://www.batlabs.com/images/maxacc2.gif <http://www.batlabs.com/images/maxacc2.gif> it shows the five pin connector with pin one towards edge of radio and numbers going 1,4,2,3,5. On Repeater Builder http://www.repeater-builder.com/maxtrac/maxtrac-option-plug.html <http://www.repeater-builder.com/maxtrac/maxtrac-option-plug.html> it shows number one pin towards the outside of the radio and the pins going 1,2,3,4,5. Has anyone notices the difference and know why BatLabs has it that way? Thanks in advance. JIM KA2AJH
