depends on if you want a whole repeater or not? I have a Micor that is ready 145.270 100 watt with sinclair duplexers and a Zetron Model 38max controller.
and two MSR2000 100 watt repeaters in the 19inch rack mount style chassis. I am in Reno Nevada. --- In [email protected], Charles Mills <w3y...@...> wrote: > > Eric, > Thanks to all for the replies so far You are correct that the type of PA > is important -- I should have included that. > > It is either going to be a Maggiore (with a 100 Watt PA added) or a Motorola > and am shooting for an MSR2000 but that gear has not been set in stone yet. > It will be determined by what we have kicked out way and we don't have a lot > of choice in the matter. Furthermore -- duplexers won't be included hence > my posting. The PA hence will be transistor based. If a Maggiore it will > be rockbound but it may not be a Maggiore. > > So...that being the case I might be doing this a bit out of order. Like a > lot of these types of projects need is high but funding is scarce. > > > On Wed, Dec 30, 2009 at 3:22 PM, Eric Lemmon <wb6...@...> wrote: > > > > > > > Chuck, > > > > It would be helpful if you provided some information about the repeater, so > > that a proper duplexer can be offered. For example, how much TX power and > > is it a tube or transistor PA? Crystal or synthesized? How sensitive is > > the receiver, and does it have a helical front end filter (i.e., Micor, > > Exec > > II, etc.)? > > > > 73, Eric Lemmon WB6FLY > > > > > > > > -----Original Message----- > > From: [email protected]<Repeater-Builder%40yahoogroups.com> > > [mailto:[email protected]<Repeater-Builder%40yahoogroups.com>] > > On Behalf Of Charles Mills > > Sent: Wednesday, December 30, 2009 12:12 PM > > To: [email protected] <Repeater-Builder%40yahoogroups.com> > > Subject: [Repeater-Builder] WTB Duplexers > > > > Hi all, > > > > A previous deal to buy some duplexers fell through for various reasons > > but the need still exists. > > > > Need a set of 4 or 6 can VHF duplexers. Do not have to be tuned to > > the ham band already - just so that they are tuneable. > > > > We can replace the wiring harness and get them re-tuned if necessary. > > > > Will drive a reasonable distance to pick up or if you want to ship, > > will pay shipping. > > > > Sinclair, WACOM, brand doesn't matter. Functionality does. > > > > Chuck / W3YNI > > > > > > > > > > -- > ===================================== > Charles L. Mills > Westmoreland Co. ARES EC > Amateur Radio Callsign W3YNI > Email: w3y...@... >
