ok thanks im gonna read the radios with the cps to check the settings, will give you an update.
--- On Fri, 1/1/10, Wayne Cornick <[email protected]> wrote: From: Wayne Cornick <[email protected]> Subject: RE: [Repeater-Builder] motorola cdm 750 To: [email protected] Date: Friday, January 1, 2010, 4:21 PM Try turning down or off the individual denounce times per pin within the accessory settings. Sounds like their set to around a second or so… Wa9ne -----Original Message----- From: Repeater-Builder@ yahoogroups. com [mailto:Repeater- buil...@yahoogro ups.com] On Behalf Of andy Sent: Thursday, December 31, 2009 6:40 AM To: Repeater-Builder@ yahoogroups. com Subject: [Repeater-Builder] motorola cdm 750 can anyoone help> i just programmed 2 motorola cdm 750 to be used as a repeater but for some reason it takes 2 seconds for it to transmit. is there something im doing with the programming? 1 radio rx the other tx but it takes 2 seconds for it to transmit by the time the signal gets to the external amplifier its another second added so its 3 seconds in total. i know its the radios because when i try it with 2 gm radios it tx almost immediatly.
