Thanks for the reply Richard. I have the GE 110 watt PA I only antipate needing around 35 watts not going to build a power house just a locat repeater. I know I can detune the PA was just trying to cut out the PA for simplicity purposes if that is possible. Greg K9GJN
--- On Wed, 1/6/10, Richard Fletcher <[email protected]> wrote: From: Richard Fletcher <[email protected]> Subject: Re: [Repeater-Builder] Mastr II mods and parts To: [email protected] Date: Wednesday, January 6, 2010, 2:53 AM Hi Greg, There is no "Mod" to make the exciter do 35 watts. Its nominal value is about 200 to 300 mw, but normally 250 mw. The way to get about 35 watts is to modify the PA itself. You can bypass the final stages of the PA and just use the first stage. There are many types and some may get you close just of the driver stage. But then again like I say, there are many types to look at that have different configurations. The first question is what is the output of the PA you have? We would need to see the type and give you some guidance from that point of what is the best option. Maybe even a picture or the part number of that PA would help. Best Regards Richard. From: Greg Niles <k9...@yahoo. com> To: Repeater-Builder@ yahoogroups. com Sent: Tue, January 5, 2010 9:33:59 PM Subject: Re: [Repeater-Builder] Mastr II mods and parts I am new to repeater building I have a GE Master II VHF repeater does GE make or is there a mod to make the exciter do 35 watts so I would not have to use a PA which I do have, just trying to make things simple. Any input would be greatly appreciated. Thanks, Greg K9GJN
