To save bandwidth, replies taken off list…
Mark – N9WYS From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Greg Niles Sent: Wednesday, January 20, 2010 9:44 PM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] Kenwood TKR 720 Mark I have only jumpered pin #11 to ground what else needs to be done? Thanks, Greg --- On Thu, 1/21/10, N9WYS <n9...@ameritech.net> wrote: From: N9WYS <n9...@ameritech.net> Subject: RE: [Repeater-Builder] Kenwood TKR 720 To: Repeater-Builder@yahoogroups.com Date: Thursday, January 21, 2010, 2:47 AM Greg, Have you disabled the internal controller? It needs to be completely disconnected and some wires jumpered before the external controller will work as designed... Mark - N9WYS -----Original Message----- From: Repeater-Builder@ yahoogroups. com <http://us.mc1112.mail.yahoo.com/mc/compose?to=Repeater-Builder%40yahoogroups.com> [mailto:Repeater-Builder@ yahoogroups. com <http://us.mc1112.mail.yahoo.com/mc/compose?to=Repeater-Builder%40yahoogroups.com> ] On Behalf Of k9gjn Sent: Wednesday, January 20, 2010 7:27 PM To: Repeater-Builder@ yahoogroups. com <http://us.mc1112.mail.yahoo.com/mc/compose?to=Repeater-Builder%40yahoogroups.com> Subject: [Repeater-Builder] Kenwood TKR 720 Trying to interface a NHRC controler with a TKR 720 can hear the controler ID very faintly in the background but cannot get it to accept any commands. Any suggestions why the repeater cannot communicate with the controler? The repeater works fine just cant get the controler to work. Thanks Greg K9GJN No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.432 / Virus Database: 271.1.1/2636 - Release Date: 01/21/10 07:34:00
<<image001.jpg>>