--- In [email protected], "skipp025" <skipp...@...> wrote: > Maybe I wasn't clear in (more than one of :-) my last > posts... let's try again. > > Where exactly do the coax harness T-fittings mount? Are > they right down on the top of the cavity screwed down to > the factory cavity coax port/probe... or is the T-fitting > for a specific single cavity (for the coax harness) spaced up > and away from the top of the cavity by a short section of > coax? > > Do you have the original cables used with those cavities > still and do you know what lengths went at certain locations? > > Your turn, > > _... _._ >
sorry, i guess i missed that. the tee fitting is UHF type, mounted on the loop. I did have the harness, for these and they were in a notch configuration. 2 cans connacted to a tee at one end and a 6" open stub on the other. the cable between cans, and the last tee was 4" of RG8 sized DB cable. I assume the stub was for harmonic suppresion. I have several of these that were taken out of service. these were on old micor stations and were installed when the micors were installed as far as i can tell. hope that helps. de kd4wov tom
