humm Doug i thaught it would simpler for me too install this board,,, i wonder if the little TKR-720 of Kenwood can do DCS??? Thanks for your observation
gervais ve2ckn -------------------------------------------------- From: "Doug Bade" <k...@thebades.net> Sent: Saturday, February 06, 2010 3:04 PM To: <Repeater-Builder@yahoogroups.com> Subject: Re: [Repeater-Builder] Master 2 and DCS > There used to be an add on board from Comm Spec that could add > DCS/DCG/DPL to a suitable radio. Many aftermarket repeater controllers > can do DCG/DCS. > > DCS modulation needs to be sent into a varactor modulator stage... > Direct FM exciters on Mastr II can do it native on the CTCSS port... > Older Phase Modulated exciters need to be handled differently... > Injecting DCS on the compensation line is a suitable possibility . The > suggested discriminator pickoff for DCS is a point in the rx in front of > Volume Sq Hi... so best to pick it off with a separate wire. > > Doug > KD8B > gervais wrote: >> >> hi all >> my master 2 repeater has a tone of 141.3 hz. >> i remember that when i programm my Phoenix i can setup a DCS tone >> ,Digital code. >> Is there a board that you slot into the Master 2 so it could use a DCS ? >> thanks >> Gervais ve2ckn >> > > > > ------------------------------------ > > > > Yahoo! Groups Links > > > > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Repeater-Builder/join (Yahoo! ID required) <*> To change settings via email: repeater-builder-dig...@yahoogroups.com repeater-builder-fullfeatu...@yahoogroups.com <*> To unsubscribe from this group, send an email to: repeater-builder-unsubscr...@yahoogroups.com <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/