Hi Duane,
Very good link to have in the old file for future reference. Thanks, Mike Mullarkey K7PFJ 6886 Sage Ave Firestone, Co 80504 303-736-9693 Office 303-954-9693 Fax 303-718-8052 Cellular _____ From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Duane Hall Sent: Monday, February 08, 2010 3:25 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Connect Controller to E&M Interface Here is a Cisco document with E&M signaling info you may find helpful... Understanding and Troubleshooting Analog E&M Interface Types and Wiring Arrangements http://www.cisco. <http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_tech_note09 186a008009452e.shtml> com/en/US/products/hw/gatecont/ps2250/products_tech_note09186a008009452e.sht ml or download a pdf at http://www.cisco. <http://www.cisco.com/application/pdf/paws/14003/e_m_overview.pdf> com/application/pdf/paws/14003/e_m_overview.pdf Duane AB8QU burkleoj wrote: > Hello All, > Has anyone connected a repeater controller such as a Arcom RC-210 or a Link-Comm RLC Series to an E&M interface to link two or more sites > together? > > I am looking for ideas and any pit falls that you may have had in the setup and configuration. > > Thanks, > Joe - WA7JAW > > > > >