Joe is right on the money... the front panel of the TM-3530 becomes a DMTF Pad in the Transmit Mode. s.
> MCH <m...@...> wrote: > > Did you try using the keys on the front of the radio as the TTP? I think > they still did that on that model and they don't have to be in a memory. > > Joe M. > > ka9qjg1 wrote: > > I have an Old Kenwood TM-3530A 220 Radio I need to be able to send TT To > > work on My Repeater Controller > > > > The radio works fine I have a TT Kenwood Mic Good Audio but NO TT , I took > > it apart and cleaned Everything and Still No TT , > > > > So I tried the Mic on My Kenwood TS-2000 Audio and TT Works fine. > > > > I downloaded the Manual and see that this Radio is the Same as > > TM-2570, TM-2550, TM-5550 E > > And TM-2530A > > > > I found that even without a TT Mic the Radio has built in TT Pad and > > Numbers can be stored in Mem I do not Hear any TT When I press them either > > . but I can hear them from the int Speaker but not in the Carrier . > > > > I did the Adjustments to increase them but nothing is heard any Thoughts on > > this would be greatly appreciated > > > > Thanks Don > > > > KA9QJG > > > > > > > > > > ------------------------------------ > > > > > > > > Yahoo! Groups Links > > > > > > > > >
