At 3/3/2010 13:08, you wrote: >My RBI-1 was working. Now what ever command you ask it to do....it jumps >the frequency of the radio 15kc. >Reset does not help. trying to even change the power setting only causes >the RBI kenwood receiver to go up 15kc. Every command sent just compounds >the display frequency by 15kc. > >When a reset is done it goes through its dance and looks ok there. > >Has anyone ever experienced this problem and know what the cure is???
Maybe a long shot, but check the modular connector that plugs into the RBI-1. Mine was bad, causing the radio to do weird things in general; a replacement from DHE fixed it. Try pushing the cable into the connector while controlling & see if anything different happens. AFAIK there is no way that the data stream from the repeater controller could be corrupted in such a way so as to cause the problem you're having, so the problem is likely either in the RBI-1, radio cable, or radio. Bob NO6B
