DCFluX wrote:
I would blame the tempreture compensation line that is going into the
ICOM before the crystals.
Please refer to the schematic on page 7 of:
http://www.repeater-builder.com/ge/lbi-library/lbi-30060d.pdf
I believe this line is typically in the 4 to 5v range
The TC line is at 4volts. When I short it to ground I can get the tx
back on freq but then the rx is off freq.
I cleaned the contacts and even put the xtal into another ICOM, same
story. So I will try to pad the capacitor with a few pf
John
