Hi Daniel, what volumes do you have to keep at Max? the repeater receiver volume? What about the received signal from the repeater? What is the level there? You have some controls on the RICK for Rx and Tx gain, I think.
Leroy J39AI From: [email protected] [mailto:[email protected]] On Behalf Of Pirici Sent: Wednesday, April 14, 2010 6:02 AM To: [email protected] Subject: [Repeater-Builder] GR300 low audio Hi to you all! Please, if anyone has experienced low audio transfer with a GR300 repeater, any solutions please? I have programmed the GR300 repeater and it works fine with one exception: the signal transmitted is very faint, in fact I have to keep the radios linked through the repeater with the volume at max and even then it is not very well. I have a RICK interface in the repeater and 2xGM300 16 channels radios. I have programmed the radios' accessory ports as RICK Tx and RICK RX (so I did not played with the pins settings myself). Please, should I look for a specific pin setting in order to increase a bit the level of the RX sound passed to the Tx radio? (is there any specific port customization setting to solve this?). Many thanks folks! Daniel; Craiova, Romania
