Thanks Kris! Good stuff! Can you think of any reason why this radio will not be read by the RSS in the first place? All I get are "Serial Bus I/O Error was detected." I know it seems like something not connected properly, but it reads all other models of Sabers just fine. This is the only RSS I have for the Sabers. COuld it be an improper version?
John Hymes La Rue Communications 10 S. Aurora Street Stockton, CA 95202 http://tinyurl.com/2dtngmn ----- Original Message ----- From: Kris Kirby To: [email protected] Sent: Monday, April 26, 2010 2:07 PM Subject: Re: [Repeater-Builder] OT: Programming Help Needed - Saber On Mon, 26 Apr 2010, La Rue Communications wrote: > I have run into a brick wall at a rather high rate of speed... as fast > as DOS can run anyway. > I am trying to figure out the band split of a (Presumed) VHF Saber > Securenet Capable portable / handheld. > I have the standard DOS RSS for Saber version 07.01.00 with a Moto Rib > Box etc. I have programmed and read many other models of Sabers, > except for this one particular model. Factory ID: H43TUN5170CN H43TUN5170xN, 6 watt, VHF Systems Saber I > Model is H99QX + 104H, which I think is a package number. Google turns > up that it may be a Military issue and no information can be found on > this. Is this true? Generate a new codeplug in the RSS and dial the options around until you see a model tag that matches the above Model. That will tell you without reading what you're holding. -- Kris Kirby, KE4AHR Disinformation Analyst
