Try the reducer meant for RG-8X.
On Mon, May 3, 2010 at 11:21 AM, Jeff DePolo <j...@broadsci.com> wrote: > >> Hi, >> >> I have read that one can put plain low cost PL259 connectors >> on FSJ1-50A Andrew 1/4 inch suplerflex using a UG-176 reducer. > > Yep. > >> Can the same be done with the Andrew LDF1-50 1/4" hardline? > > Nope. The OD of the shield is too big to fit into a UG-176 reducer. FSJ1 > is exactly a quarter inch OD without the jacket. LDF1 is 0.31". A UG-176 > reducer is designed to fit over RG8X, RG59, et al which are typically 0.242" > OD. You can usually coerce the reducer onto FSJ1, but you'd have to drill > it out bigger to fit LDF1 into it. > > --- Jeff WN3A > > > > ------------------------------------ > > > > Yahoo! Groups Links > > > >
