I see that your IDer is a model 1300 and mine are model 700, however, I received this reply from one of Racom's people that may be helpful with reprogramming any of Racom's IDers:
Snip. Good Afternoon Jim: Thank you for the e-mail and your interests in Racom Products. Generally speaking all of the model 700's can be reprogrammed in the field via a PC. However, over the years the circuit boards used in the 700's have changed. Which means a programming kit for one unit might not work on another. If you would remove the lid of each unit and send me the board number & its PROM number I can match up the programming kits ( disk and cable ) needed and match up the correct Service Manuals for each. Or, you could send them to us and we can reprogram all of them. Basically, the cost of a programming kit is: $24.00, factory pro- gramming is: $19.000 and a Service Manual is $10.00, plus the cost of shipping, handling and insurance. If you have any questions please give me a call, thanks again and have a good day. Sincerely, John M. Dukovich [email protected] Racom Products 800-722-6664 www.racominc.com 2024 West Schaaf Road Cleveland, Ohio 44109 USA .Snip 73, Jim _____ From: [email protected] [mailto:[email protected]] On Behalf Of mzfb2001 Sent: Sunday, May 23, 2010 2:07 PM To: [email protected] Subject: [Repeater-Builder] Racom Station Identifier Hi all I have a Racom 1300 morse code station Identifier. I am looking to see if there is a way to reprogram the Prom in the unit. The company is no longer active. The prom contains the call sign information. I know I could throw it in the trash and buy something new but I hate doing that when all it would take is to reprogram the Prom. Is there a way to read the prom and then change the information in it and then program a new prom provided I can find a new one. Thanks in advance Mike
