Thanks to everybody I wll go with the duplexers

--- On Sat, 5/29/10, ZPO <[email protected]> wrote:


From: ZPO <[email protected]>
Subject: Re: [Repeater-Builder] GMRS Repeater ANT (UHF)
To: [email protected]
Date: Saturday, May 29, 2010, 10:22 PM


  



I trust Eric's experience and software more than my SWAG any day.

Given the prices for mobile notch duplexers, I don't see a reason not
to use one.

73-N5VFF/Brian

On Sat, May 29, 2010 at 10:05 PM, Eric Lemmon <[email protected]> wrote:
> Robert,
>
> I put 50 watts and 0.3 uV at GMRS frequencies into my Comm Shop for Windows
> program, and it suggests that 73 dB of isolation is needed to avoid desense.
> This amount of isolation can be achieved with about 39 feet of vertical
> antenna separation or about 1020 feet of horizontal separation.  Since you
> can use a typical mobile notch duplexer for this application, it hardly
> makes any sense to erect a tower so that you can run two antennas.  Even so,
> you should elevate your antenna as much as possible if you expect to get any
> decent range.
>
> 73, Eric Lemmon WB6FLY
>
>
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Robert Boles
> Sent: Saturday, May 29, 2010 9:46 PM
> To: [email protected]
> Subject: Re: [Repeater-Builder] GMRS Repeater ANT (UHF)
>
>
>
> it is 50 watts out,   its at my home , and no other repeater with miles  of
> this location and i have the ant and hard line
>
> --- On Sat, 5/29/10, ZPO <[email protected]> wrote:
>
>
>
>        From: ZPO <[email protected]>
>        Subject: Re: [Repeater-Builder] GMRS Repeater ANT (UHF)
>        To: [email protected]
>        Date: Saturday, May 29, 2010, 9:18 PM
>
>
>
>        Depends on the power level. What type of site will the repeater be
>        located at? A duplexer is probably going to be cheaper than a 2nd
>        antenna and 2nd run of superflex.
>
>        73-N5VFF/Brian
>
>        On Sat, May 29, 2010 at 7:21 AM, Robert <[email protected]
> <http://us.mc802.mail.yahoo.com/mc/compose?to=bobeic2%40yahoo.com> > wrote:
>        > how much space is needed between the TX and RX ant and which type
> of cable to use ?
>        >
>        >
>        >
>        > ------------------------------------
>        >
>        >
>        >
>        > Yahoo! Groups Links
>        >
>        >
>        >
>        >
>
>
>
>
>
>
> ------------------------------------
>
>
>
> Yahoo! Groups Links
>
>
>
>





Reply via email to