Hi

yes I use a pair of 50Mhz maxtracs as a rptr and all in/oututs are
via the 16w acc socket. Yes the firmware will not allow the rss
to control the tx pwr out so a little cut and and a pot to the 9.6v
line allows manual pwr control

73

Steve, M1SWB(UK)
----- Original Message ----- 
From: "James H Vernetti" <[email protected]>
To: <[email protected]>
Sent: Sunday, May 30, 2010 7:05 PM
Subject: Re: [Repeater-Builder] Motorola Maxtrac for cw beacon


>I did one a year or two ago, do not key the PTT as it will have a very 
>nasty output. I did the manual power control mod to control the output 
>power and then broke the B+ line to the second driver in the power amp 
>section, key it with a relay and it will work fairly well.
>
>
> ----- Original Message ----- 
> From: "Steve" <[email protected]>
> To: <[email protected]>
> Sent: Sunday, May 30, 2010 8:19 AM
> Subject: Re: [Repeater-Builder] Motorola Maxtrac for cw beacon
>
>
>> Hi
>> should be easy just use one of the cheap CW iders.3 connections
>> ground, ptt and tx af in
>>
>> Steve
>> ----- Original Message ----- 
>> From: "Gordon" <[email protected]>
>> To: <[email protected]>
>> Sent: Sunday, May 30, 2010 2:53 PM
>> Subject: Re: [Repeater-Builder] Motorola Maxtrac for cw beacon
>>
>>
>> > Sorry for the confusion, must have had repeater on the brain. I did not
>> > mean repeater. I would like to
>> > setup a beacon on the lower part of 6 meters around 50.060 cw only.
>> >
>> > Thanks,
>> >
>> > Gordon N4LR
>> >
>> >
>> > Mike Morris wrote:
>> >>
>> >>
>> >> At 01:46 PM 05/28/10, you wrote:
>> >> >Is it possible to mod a maxtrac for cw operation for a ham 6 meter
>> >> >repeater. If not maxtrac what about other Motorola or GE Radios.
>> >> >
>> >> >Gordon N4LR
>> >>
>> >> I'm not understanding something.
>> >>
>> >> The subject line says CW beacon, the body
>> >> of your message refers to CW operation
>> >> and a repeater. Last I knew, most repeaters
>> >> do voice...
>> >>
>> >> Can you clarify?
>> >>
>> >> Mike WA6ILQ
>> >>
>> >
>> >
>> > ------------------------------------
>> >
>> >
>> >
>> > Yahoo! Groups Links
>> >
>> >
>> >
>>
>
>
> ------------------------------------
>
>
>
> Yahoo! Groups Links
>
>
>

Reply via email to