Have used these for years. Vero, Vector, GC, Rat Shack,etc. No what I am looking for is small etched boards with one or two transistors 1-2 inch square. and other pads so you can lay out simple circuits. Same for IC's.
I found a few surplus here locally and they worked out great. Ralph ----- Original Message ----- From: "Jeff DePolo" <j...@broadsci.com> To: Repeater-Builder@yahoogroups.com Sent: Tuesday, July 6, 2010 2:32:03 PM Subject: RE: [Repeater-Builder] Proto boards Vector Electronics (Google "vectorbord" and "circbord", not typos), GC Electronics, and Radio Shack (if you can find a store still stocking them). --- Jeff WN3A > -----Original Message----- > From: Repeater-Builder@yahoogroups.com > [mailto: Repeater-Builder@yahoogroups.com ] On Behalf Of Ralph S. Turk > Sent: Tuesday, July 06, 2010 3:17 PM > To: Repeater-Builder > Subject: [Repeater-Builder] Proto boards > > > > Hi All > Looking for small etched, maybe drilled, small boards with layout for > several transistors, resistors etc all isolated pads > > Also looking for ones that have layouts for 8pin, 14 pin or > 16 pin dip with > isolated pads for hook up > > I have some misc of the above and they are great for > inverters, buffers, > little op amps for increasing the level of the disc or tx audio. > > Any ideas? > > Ralph > > > >