For 10v G1 cards. For a non CG station the 10v card jumpers H1-H2 and H3-H9 are present. The audio muting is through jumper H16-H17 and is not present. If no 16-17 jumper then remove Q12 for repeat audio. Q12 is the audio muting transistor for RX1 Mute. That should at least get you started as a carrier squelch station. The repeater PTT comes from the RPT control card in this case.
--- In Repeater-Builder@yahoogroups.com, "terry_wx3m" <wx3m.te...@...> wrote: >
