Thanks Mike, so you are saying no preamp needed and any recommendations for an amp to be combined with the rig. I have a Henry UHF amp in hand. I would think any amp would work with simple RF out of the repeater. Am just curious more about sensitivity than anything.
Thanks ----- Original Message ----- From: [email protected] To: [email protected] Sent: Saturday, July 17, 2010 3:06 PM Subject: RE: [Repeater-Builder] Kenwood TKR850 series receive sensitivity Your repeater should receive good to a -120db. You can get it a bit better with some time tuning. If your repeater is out of the box it will be def and will need to be tuned. Mike Mullarkey K7PFJ 6886 Sage Ave Firestone, Co 80504 303-736-9693 ------------------------------------------------------------------------------ From: [email protected] [mailto:[email protected]] On Behalf Of K5IN Sent: Saturday, July 17, 2010 4:00 PM To: [email protected] Subject: [Repeater-Builder] Kenwood TKR850 series receive sensitivity Good afternoon, I am curious as to the receive sensitivity on these units when in the amateur repeater duty. Receive would be 445-447mhz. Preamp necessary? What about driving an amp: any recommendation there? An amp putting out 60-80 watts. Thanks, Brian, k5in
