We use 1/4" superflex in all of our cabinets for 800 MHz systems on the receive side so at VHF it should work just as well. Plus, there are BNC connectors for the 1/4" superflex.
Jamey Wright Systems Analyst/EDACS Administrator Morgan County EMCD 911 Decatur, AL 256-552-0911 > -----Original Message----- > From: [email protected] [mailto:Repeater- > [email protected]] On Behalf Of kg4ogn > Sent: Wednesday, July 21, 2010 3:32 PM > To: [email protected] > Subject: [Repeater-Builder] Need Help Locating Connector, Micro N > Female Chasis Mount Crimp On > > I am needing to replace the receive connector on a Kenwood TKR-750 > repeater. The existing connector is a Female BNC Chasis mount. I am > doing away with the LMR400 interconnects inside the cabinet and > upgrading to 1/2'' Superflex. Since no one makes a BNC connector for > 1/2 hardline I would like to swap the RX BNC connector out with an N > connector. I've been searching the web for the last 40 minutes and > can't seem to find a "Micro" N Female Chasis mount crimp on connector > (I say micro because the current connector is a BNC with a very small > flange on it and a standard flange on an N Connector is too large and I > don't want to get into drilling new holes on the repeater) > I'm not sure if such a connector even exists, but I figured I would > ask the experts and see if anyone could point me in the right > direction. Thanks for the help guys... > > Alex N4TIA > > > > ------------------------------------ > > > > Yahoo! Groups Links > > >
