Upload the pics to the group PHOTOS section. Always nice to have stuff like that available for reference.
Joe M. David Jordan wrote: > > > I recently opened up a Polyphaser unit we used on one of our remote > sites… it covered both 2m and 70cm. We were experiencing poor receive > at the site. Replaced the unit and receiver sensitivity is once again > hot. Anyone want pics of the insides respond direct and I’ll ship you > the photos…not much to see… a gas tube and what looks like a surface > mount resistor in series with the gas tube. > > > > 73, > > Dave > > Wa3gin > > > > ------------------------------------------------------------------------ > > *From:* [email protected] > [mailto:[email protected]] *On Behalf Of *Oz-in-DFW > *Sent:* Tuesday, August 17, 2010 4:37 PM > *To:* [email protected] > *Subject:* Re: [Repeater-Builder] Polyphaser Question > > > > Polyphasers have a shunt protection element. It usually fails and > becomes leaky so you get a loss/VSWR indication. It can fail open or > short. If it's open, there is nothing to detect. > > > > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Repeater-Builder/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
