He dos go in the Programming and Set it Low but still sees 5 Volts , He wants
is Less which I guess is called Low He knows about and how to make up a
little Ext Switching Transistor Ckt to invert it But rather be able to do it
from the 16 Pin on back of the radio
He
wants to use it as some type of link . Well unfortunately I did not have
a Answer ,
In My first question I accidently said High not Low and A Big Thanks to the
people who have already sent Suggestions This is a follow up Question with
more info . He also said He was told of anther Menu in the Radio to set it up
too. I have a feeling the Radio has a Bad Switching transistor inn this Ckt .
Thanks in Advance
Don
KA9QJG
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Richard W. Solomon
Sent: Sunday, August 22, 2010 10:25 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Motorola Maxtrac Help
In the RSS, hit F2, Radio Wide, then F9. You will see a list of pin-outs that
you can select. One is PL/DPL & CSQ Det. You can set it High or Low
73, Dick, W1KSZ
,___