TKR-751 is a full blown VHF high band repeater.... Nothing similar there to the TK-705 or TK-805. The TK-862G is somewhat similar to the TK-805 in that it is a UHF mobile rig. It requires KPG-56D software and the cable that works on the TK-705/805 will also work on the TKR-751 and the TK-862. The TKR-751 takes KPG-91G if I recall correctly. I am unable to provide this software for the group as I work for a Kenwood LM dealer and there are the typical software copyright laws that apply. I can help with wiring diagrams however... 73
----- Original Message ----- From: [email protected] <[email protected]> To: [email protected] <[email protected]> Sent: Sat Aug 28 01:24:33 2010 Subject: Re: [Repeater-Builder] Wacom duplexer um not sure there, mine is either Tk705d or Tk805d both are 99% same software to use is KPG6D programming software and KPG4 cable Marcus On Sat, Aug 28, 2010 at 6:26 PM, NORM KNAPP <[email protected]> wrote: By "these radios" do you mean the TKR-751 (same as TKR-750) and the TK-862G? ----- Original Message ----- From: [email protected] <mailto:Repeater-Builder%40yahoogroups.com> <[email protected] <mailto:Repeater-Builder%40yahoogroups.com> > To: [email protected] <mailto:Repeater-Builder%40yahoogroups.com> <[email protected] <mailto:Repeater-Builder%40yahoogroups.com> > Sent: Sat Aug 28 01:17:07 2010 Subject: Re: [Repeater-Builder] Wacom duplexer Change of direction for a brief second or three Does anyone have the PC programing software for these radios, and perhaps by slim chance the wiring diagram for the PC cable to interconnect Thanks in advance Marcus
