> "mzfb2001" <m...@...> wrote: > I am looking for imformation to make a cable to connect > a Pyramid VRS to a Motorola Lowband X9000. The print out > provided by Pyramid works but its keeps the Pyramid in > constant transmit. Thanks for any help in advance > Mike
I just sorted this same mess out for a customer who had to have it done. A low-band Syntor with a Pyramid SVR-200. The Pyramid Unit duplicated the PAC-RT connections with the exception of the enable disable line, which were routed up to the control head through a "redefined wire and pin". The wire was then internally jumpered (inside the control head) to the adjacent control head plug and then brought out to an external on/off switch. It will work and there's nothing special about hooking it up. I received the Syntor-Pyramid combination wired with an original PAC-RT cable setup (obviously modified to plug into the SVR-200). I had and used the original Syntor Manual information, which includes the PAC-RT cable routing. The only magic and dance was actually getting the on/off switch to work through the control cable and head up front at the operator and control head mount position. So, in short it would be handy to have the Syntor Book with the PAC-RT cable info included. In fact, "handy" is pretty much a "must have the manual" if you're flying without one. s.
