Forgot to ask . . . is there a way to bring the dependency for PIL 1.1.6
down to 1.1.5, which I can get an rpm for?

Cheers,
-Lyndon-


On Sun, Nov 23, 2008 at 9:22 PM, Lyndon Washington <
[EMAIL PROTECTED]> wrote:

> Mmmm! On my system there is a dependency between python-tk and
> python-devel.  python-devel is needed by python-setuptools.  Removing
> python-tk will request that I remove the other two.
>
> Any other ideas?
>
> Cheers,
> -Lyndon-
>
>
> On Sun, Nov 23, 2008 at 8:01 PM, Christian Hammond <[EMAIL PROTECTED]>wrote:
>
>> I've noticed this as well. Best solution is to remove the python-tk
>> package from your system.
>>
>> Christian
>>
>> --
>> Christian Hammond - [EMAIL PROTECTED]
>> VMware, Inc.
>>
>>
>> On Sun, Nov 23, 2008 at 5:00 PM, Lyndon Washington <
>> [EMAIL PROTECTED]> wrote:
>>
>>> Hi,
>>>
>>> I tried to move from a svn based install to the latest install and
>>> unfortunately failed when easy_install tried to install the dependency of
>>> PIL.
>>> I have [EMAIL PROTECTED]
>>> also an rpm for [EMAIL PROTECTED]
>>>
>>> The error is below.  Anything obvious to any python people (of which I am
>>> not)?
>>>
>>> Cheers,
>>> -Lyndon-
>>>
>>> Searching for PIL
>>> Reading http://www.review-board.org/downloads/mirror/
>>> Reading http://www.review-board.org/downloads/nightlies/
>>> Reading http://www.review-board.org/downloads/bleeding/
>>> Best match: PIL 1.1.6
>>> Downloading
>>> http://www.review-board.org/downloads/mirror/PIL-1.1.6.tar.gz
>>> Processing PIL-1.1.6.tar.gz
>>> Running PIL-1.1.6/setup.py -q bdist_egg --dist-dir
>>> /tmp/easy_install-zy1Wjh/PIL-1.1.6/egg-dist-tmp-6Gg9cV
>>> libImaging/Effects.c:210: warning: 'perlin_init' defined but not used
>>> libImaging/File.c: In function 'ImagingOpenPPM':
>>> libImaging/File.c:112: warning: ignoring return value of 'fread',
>>> declared with attribute warn_unused_result
>>> libImaging/File.c:119: warning: ignoring return value of 'fread',
>>> declared with attribute warn_unused_result
>>> libImaging/File.c: In function 'ImagingSaveRaw':
>>> libImaging/File.c:144: warning: ignoring return value of 'fwrite',
>>> declared with attribute warn_unused_result
>>> libImaging/File.c:151: warning: ignoring return value of 'fwrite',
>>> declared with attribute warn_unused_result
>>> libImaging/Geometry.c:236: warning: 'quadratic_transform' defined but not
>>> used
>>> libImaging/Quant.c: In function 'rehash_collide':
>>> libImaging/Quant.c:154: warning: cast to pointer from integer of
>>> different size
>>> libImaging/Quant.c: At top level:
>>> libImaging/Quant.c:311: warning: 'test_sorted' defined but not used
>>> libImaging/QuantHash.c:136: warning: '_hashtable_test' defined but not
>>> used
>>> /usr/lib64/gcc/x86_64-suse-linux/4.1.2/../../../../x86_64-suse-linux/bin/ld:
>>> skipping incompatible /usr/lib/libz.so when searching for -lz
>>> /usr/lib64/gcc/x86_64-suse-linux/4.1.2/../../../../x86_64-suse-linux/bin/ld:
>>> skipping incompatible /usr/lib/libz.a when searching for -lz
>>> /usr/lib64/gcc/x86_64-suse-linux/4.1.2/../../../../x86_64-suse-linux/bin/ld:
>>> skipping incompatible /usr/lib/libpthread.so when searching for -lpthread
>>> /usr/lib64/gcc/x86_64-suse-linux/4.1.2/../../../../x86_64-suse-linux/bin/ld:
>>> skipping incompatible /usr/lib/libpthread.a when searching for -lpthread
>>> /usr/lib64/gcc/x86_64-suse-linux/4.1.2/../../../../x86_64-suse-linux/bin/ld:
>>> skipping incompatible /usr/lib/libc.so when searching for -lc
>>> /usr/lib64/gcc/x86_64-suse-linux/4.1.2/../../../../x86_64-suse-linux/bin/ld:
>>> skipping incompatible /usr/lib/libc.a when searching for -lc
>>> _imagingtk.c:20:16: error: tk.h: No such file or directory
>>> _imagingtk.c:23: error: expected ')' before '*' token
>>> _imagingtk.c:31: error: expected specifier-qualifier-list before
>>> 'Tcl_Interp'
>>> _imagingtk.c: In function '_tkinit':
>>> _imagingtk.c:37: error: 'Tcl_Interp' undeclared (first use in this
>>> function)
>>> _imagingtk.c:37: error: (Each undeclared identifier is reported only once
>>> _imagingtk.c:37: error: for each function it appears in.)
>>> _imagingtk.c:37: error: 'interp' undeclared (first use in this function)
>>> _imagingtk.c:45: error: expected expression before ')' token
>>> _imagingtk.c:51: error: 'TkappObject' has no member named 'interp'
>>> _imagingtk.c:55: warning: implicit declaration of function
>>> 'TkImaging_Init'
>>> error: Setup script exited with error: command 'gcc' failed with exit
>>> status 1
>>>
>>>
>>>
>>> On Sun, Nov 23, 2008 at 6:12 AM, Christian Hammond <[EMAIL PROTECTED]>wrote:
>>>
>>>> Hi everyone.
>>>>
>>>> We've just finished moving over to a new way of installing and upgrading
>>>> Review Board.
>>>>
>>>> Review Board, Djblets, Django-Evolution, PIL and Django are now packaged
>>>> up in such a way where you can install or upgrade them all with one 
>>>> command.
>>>>
>>>> Site installation and upgrading is also handled through a new tool,
>>>> rb-site.
>>>>
>>>> The new installation procedure is documented at
>>>> http://www.review-board.org/wiki/GettingStarted. It includes
>>>> information on migrating from existing installations.
>>>>
>>>> To sum up the new changes, basic installation has mostly become:
>>>>
>>>>    $ sudo easy_install ReviewBoard
>>>>    $ sudo rb-site install /var/www/reviews.example.com
>>>>
>>>> For the most part, nothing too fundamental has changed. It's just easier
>>>> to get going now. We are, however, considering some large changes within 
>>>> the
>>>> SVN tree that would break sites running out of the tree. This will probably
>>>> happen after 1.0, but may happen sooner if we decide it must be done. We
>>>> recommend that everybody makes an effort to move to the new install method.
>>>>
>>>> I've done a number of test installs without any problems, but if you hit
>>>> an issue, please let me know and I'll work to address it.
>>>>
>>>> Christian
>>>>
>>>> --
>>>> Christian Hammond - [EMAIL PROTECTED]
>>>> VMware, Inc.
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>
>> >>
>>
>

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"reviewboard" group.
To post to this group, send email to reviewboard@googlegroups.com
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/reviewboard?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to