Thanks for the information. Nothing stands out as being immediately wrong.

Try running the Python interpreter (python.exe) and typing:

    import reviewboard

See if that succeeds or fails. If it fails, then your Python Path
isn't correct, somehow. If it succeeds, well, hard to say what's
wrong.

Christian

--
Christian Hammond - chip...@chipx86.com
Review Board - http://www.reviewboard.org
VMware, Inc. - http://www.vmware.com



On Fri, Dec 3, 2010 at 5:19 AM, T.O.AFN <torsten.ockenf...@assfinet.de> wrote:
> Thanks for the fast answers, here are the informations you asked for:
>
>
> ReviewBoard egg Loacation:
> -----------------------------------------------------------
>
> C:\Python27\Lib\site-packages\ReviewBoard-1.5.1-py2.7.egg
>
>
> ===========================================================
>
>
> C:\Program Files (x86)\Apache Software Foundation\Apache2.2\conf
> \httpd.conf:
> -----------------------------------------------------------
>
> #
> # This is the main Apache HTTP server configuration file.  It contains
> the
> # configuration directives that give the server its instructions.
> # See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
> # In particular, see
> # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
> # for a discussion of each configuration directive.
> #
> # Do NOT simply read the instructions in here without understanding
> # what they do.  They're here only as hints or reminders.  If you are
> unsure
> # consult the online docs. You have been warned.
> #
> # Configuration and logfile names: If the filenames you specify for
> many
> # of the server's control files begin with "/" (or "drive:/" for
> Win32), the
> # server will use that explicit path.  If the filenames do *not* begin
> # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
> # with ServerRoot set to "C:/Program Files (x86)/Apache Software
> Foundation/Apache2.2" will be interpreted by the
> # server as "C:/Program Files (x86)/Apache Software Foundation/
> Apache2.2/logs/foo.log".
> #
> # NOTE: Where filenames are specified, you must use forward slashes
> # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
> # If a drive letter is omitted, the drive on which httpd.exe is
> located
> # will be used by default.  It is recommended that you always supply
> # an explicit drive letter in absolute paths to avoid confusion.
>
> #
> # ServerRoot: The top of the directory tree under which the server's
> # configuration, error, and log files are kept.
> #
> # Do not add a slash at the end of the directory path.  If you point
> # ServerRoot at a non-local disk, be sure to point the LockFile
> directive
> # at a local disk.  If you wish to share the same ServerRoot for
> multiple
> # httpd daemons, you will need to change at least LockFile and
> PidFile.
> #
> ServerRoot "C:/Program Files (x86)/Apache Software Foundation/
> Apache2.2"
>
> #
> # Listen: Allows you to bind Apache to specific IP addresses and/or
> # ports, instead of the default. See also the <VirtualHost>
> # directive.
> #
> # Change this to Listen on specific IP addresses as shown below to
> # prevent Apache from glomming onto all bound IP addresses.
> #
> #Listen 12.34.56.78:80
> Listen 80
>
> #
> # Dynamic Shared Object (DSO) Support
> #
> # To be able to use the functionality of a module which was built as a
> DSO you
> # have to place corresponding `LoadModule' lines at this location so
> the
> # directives contained in it are actually available _before_ they are
> used.
> # Statically compiled modules (those listed by `httpd -l') do not need
> # to be loaded here.
> #
> # Example:
> # LoadModule foo_module modules/mod_foo.so
> #
> LoadModule actions_module modules/mod_actions.so
> LoadModule alias_module modules/mod_alias.so
> LoadModule asis_module modules/mod_asis.so
> LoadModule auth_basic_module modules/mod_auth_basic.so
> #LoadModule auth_digest_module modules/mod_auth_digest.so
> #LoadModule authn_alias_module modules/mod_authn_alias.so
> #LoadModule authn_anon_module modules/mod_authn_anon.so
> #LoadModule authn_dbd_module modules/mod_authn_dbd.so
> #LoadModule authn_dbm_module modules/mod_authn_dbm.so
> LoadModule authn_default_module modules/mod_authn_default.so
> LoadModule authn_file_module modules/mod_authn_file.so
> #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
> #LoadModule authz_dbm_module modules/mod_authz_dbm.so
> LoadModule authz_default_module modules/mod_authz_default.so
> LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
> LoadModule authz_host_module modules/mod_authz_host.so
> #LoadModule authz_owner_module modules/mod_authz_owner.so
> LoadModule authz_user_module modules/mod_authz_user.so
> LoadModule autoindex_module modules/mod_autoindex.so
> #LoadModule cache_module modules/mod_cache.so
> #LoadModule cern_meta_module modules/mod_cern_meta.so
> LoadModule cgi_module modules/mod_cgi.so
> #LoadModule charset_lite_module modules/mod_charset_lite.so
> #LoadModule dav_module modules/mod_dav.so
> #LoadModule dav_fs_module modules/mod_dav_fs.so
> #LoadModule dav_lock_module modules/mod_dav_lock.so
> #LoadModule dbd_module modules/mod_dbd.so
> #LoadModule deflate_module modules/mod_deflate.so
> LoadModule dir_module modules/mod_dir.so
> #LoadModule disk_cache_module modules/mod_disk_cache.so
> #LoadModule dumpio_module modules/mod_dumpio.so
> LoadModule env_module modules/mod_env.so
> #LoadModule expires_module modules/mod_expires.so
> #LoadModule ext_filter_module modules/mod_ext_filter.so
> #LoadModule file_cache_module modules/mod_file_cache.so
> #LoadModule filter_module modules/mod_filter.so
> #LoadModule headers_module modules/mod_headers.so
> #LoadModule ident_module modules/mod_ident.so
> #LoadModule imagemap_module modules/mod_imagemap.so
> LoadModule include_module modules/mod_include.so
> #LoadModule info_module modules/mod_info.so
> LoadModule isapi_module modules/mod_isapi.so
> #LoadModule ldap_module modules/mod_ldap.so
> #LoadModule logio_module modules/mod_logio.so
> LoadModule log_config_module modules/mod_log_config.so
> #LoadModule log_forensic_module modules/mod_log_forensic.so
> #LoadModule mem_cache_module modules/mod_mem_cache.so
> LoadModule mime_module modules/mod_mime.so
> #LoadModule mime_magic_module modules/mod_mime_magic.so
> LoadModule negotiation_module modules/mod_negotiation.so
> #LoadModule proxy_module modules/mod_proxy.so
> #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
> #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
> #LoadModule proxy_connect_module modules/mod_proxy_connect.so
> #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
> #LoadModule proxy_http_module modules/mod_proxy_http.so
> #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
> #LoadModule reqtimeout_module modules/mod_reqtimeout.so
> #LoadModule rewrite_module modules/mod_rewrite.so
> LoadModule setenvif_module modules/mod_setenvif.so
> #LoadModule speling_module modules/mod_speling.so
> #LoadModule ssl_module modules/mod_ssl.so
> #LoadModule status_module modules/mod_status.so
> #LoadModule substitute_module modules/mod_substitute.so
> #LoadModule unique_id_module modules/mod_unique_id.so
> #LoadModule userdir_module modules/mod_userdir.so
> #LoadModule usertrack_module modules/mod_usertrack.so
> #LoadModule version_module modules/mod_version.so
> #LoadModule vhost_alias_module modules/mod_vhost_alias.so
> LoadModule wsgi_module modules/mod_wsgi.so
>
> <IfModule !mpm_netware_module>
> <IfModule !mpm_winnt_module>
> #
> # If you wish httpd to run as a different user or group, you must run
> # httpd as root initially and it will switch.
> #
> # User/Group: The name (or #number) of the user/group to run httpd as.
> # It is usually good practice to create a dedicated user and group for
> # running httpd, as with most system services.
> #
> User daemon
> Group daemon
>
> </IfModule>
> </IfModule>
>
> # 'Main' server configuration
> #
> # The directives in this section set up the values used by the 'main'
> # server, which responds to any requests that aren't handled by a
> # <VirtualHost> definition.  These values also provide defaults for
> # any <VirtualHost> containers you may define later in the file.
> #
> # All of these directives may appear inside <VirtualHost> containers,
> # in which case these default settings will be overridden for the
> # virtual host being defined.
> #
>
> #
> # ServerAdmin: Your address, where problems with the server should be
> # e-mailed.  This address appears on some server-generated pages, such
> # as error documents.  e.g. ad...@your-domain.com
> #
> ServerAdmin ad...@assfinet.test
>
> #
> # ServerName gives the name and port that the server uses to identify
> itself.
> # This can often be determined automatically, but we recommend you
> specify
> # it explicitly to prevent problems during startup.
> #
> # If your host doesn't have a registered DNS name, enter its IP
> address here.
> #
> #ServerName WIN-E36JBVB964M.assfinet.test:80
>
> #
> # DocumentRoot: The directory out of which you will serve your
> # documents. By default, all requests are taken from this directory,
> but
> # symbolic links and aliases may be used to point to other locations.
> #
> #######################################################################DocumentRoot
> "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/htdocs"
> DocumentRoot "C:/var/www/reviews.example.com/htdocs"
>
> #
> # Each directory to which Apache has access can be configured with
> respect
> # to which services and features are allowed and/or disabled in that
> # directory (and its subdirectories).
> #
> # First, we configure the "default" to be a very restrictive set of
> # features.
> #
> <Directory />
>    Options FollowSymLinks
>    AllowOverride None
>    Order deny,allow
>    Deny from all
> </Directory>
>
> #
> # Note that from this point forward you must specifically allow
> # particular features to be enabled - so if something's not working as
> # you might expect, make sure that you have specifically enabled it
> # below.
> #
>
> #
> # This should be changed to whatever you set DocumentRoot to.
> #
> #<Directory "C:/Program Files (x86)/Apache Software Foundation/
> Apache2.2/htdocs">
> #<Directory "C:/var/www/wsgi-scripts">
> <Directory "C:/var/www/reviews.example.com/htdocs">
>    #
>    # Possible values for the Options directive are "None", "All",
>    # or any combination of:
>    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI
> MultiViews
>    #
>    # Note that "MultiViews" must be named *explicitly* --- "Options
> All"
>    # doesn't give it to you.
>    #
>    # The Options directive is both complicated and important.  Please
> see
>    # http://httpd.apache.org/docs/2.2/mod/core.html#options
>    # for more information.
>    #
>    Options Indexes FollowSymLinks
>
>    #
>    # AllowOverride controls what directives may be placed
> in .htaccess files.
>    # It can be "All", "None", or any combination of the keywords:
>    #   Options FileInfo AuthConfig Limit
>    #
>    AllowOverride None
>
>    #
>    # Controls who can get stuff from this server.
>    #
>    Order allow,deny
>    Allow from all
>
> </Directory>
>
> #
> # DirectoryIndex: sets the file that Apache will serve if a directory
> # is requested.
> #
> <IfModule dir_module>
>    DirectoryIndex index.html
> </IfModule>
>
> #
> # The following lines prevent .htaccess and .htpasswd files from
> being
> # viewed by Web clients.
> #
> <FilesMatch "^\.ht">
>    Order allow,deny
>    Deny from all
>    Satisfy All
> </FilesMatch>
>
> #
> # ErrorLog: The location of the error log file.
> # If you do not specify an ErrorLog directive within a <VirtualHost>
> # container, error messages relating to that virtual host will be
> # logged here.  If you *do* define an error logfile for a
> <VirtualHost>
> # container, that host's errors will be logged there and not here.
> #
> ErrorLog "logs/error.log"
>
> #
> # LogLevel: Control the number of messages logged to the error_log.
> # Possible values include: debug, info, notice, warn, error, crit,
> # alert, emerg.
> #
> LogLevel warn
>
> <IfModule log_config_module>
>    #
>    # The following directives define some format nicknames for use
> with
>    # a CustomLog directive (see below).
>    #
>    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-
> Agent}i\"" combined
>    LogFormat "%h %l %u %t \"%r\" %>s %b" common
>
>    <IfModule logio_module>
>      # You need to enable mod_logio.c to use %I and %O
>      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-
> Agent}i\" %I %O" combinedio
>    </IfModule>
>
>    #
>    # The location and format of the access logfile (Common Logfile
> Format).
>    # If you do not define any access logfiles within a <VirtualHost>
>    # container, they will be logged here.  Contrariwise, if you *do*
>    # define per-<VirtualHost> access logfiles, transactions will be
>    # logged therein and *not* in this file.
>    #
>    CustomLog "logs/access.log" common
>
>    #
>    # If you prefer a logfile with access, agent, and referer
> information
>    # (Combined Logfile Format) you can use the following directive.
>    #
>    #CustomLog "logs/access.log" combined
> </IfModule>
>
> <IfModule alias_module>
>    #
>    # Redirect: Allows you to tell clients about documents that used
> to
>    # exist in your server's namespace, but do not anymore. The
> client
>    # will make a new request for the document at its new location.
>    # Example:
>    # Redirect permanent /foo http://WIN-E36JBVB964M.assfinet.test/bar
>
>    #
>    # Alias: Maps web paths into filesystem paths and is used to
>    # access content that does not live under the DocumentRoot.
>    # Example:
>    # Alias /webpath /full/filesystem/path
>    #
>    # If you include a trailing / on /webpath then the server will
>    # require it to be present in the URL.  You will also likely
>    # need to provide a <Directory> section to allow access to
>    # the filesystem path.
>
>    #
>    # ScriptAlias: This controls which directories contain server
> scripts.
>    # ScriptAliases are essentially the same as Aliases, except that
>    # documents in the target directory are treated as applications
> and
>    # run by the server when requested rather than as documents sent
> to the
>    # client.  The same rules about trailing "/" apply to ScriptAlias
>    # directives as to Alias.
>    #
>    ScriptAlias /cgi-bin/ "C:/Program Files (x86)/Apache Software
> Foundation/Apache2.2/cgi-bin/"
>
> </IfModule>
>
> <IfModule cgid_module>
>    #
>    # ScriptSock: On threaded servers, designate the path to the UNIX
>    # socket used to communicate with the CGI daemon of mod_cgid.
>    #
>    #Scriptsock logs/cgisock
> </IfModule>
>
> #
> # "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/cgi-
> bin" should be changed to whatever your ScriptAliased
> # CGI directory exists, if you have that configured.
> #
> <Directory "C:/Program Files (x86)/Apache Software Foundation/
> Apache2.2/cgi-bin">
>    AllowOverride None
>    Options None
>    Order allow,deny
>    Allow from all
> </Directory>
>
> #
> # DefaultType: the default MIME type the server will use for a
> document
> # if it cannot otherwise determine one, such as from filename
> extensions.
> # If your server contains mostly text or HTML documents, "text/plain"
> is
> # a good value.  If most of your content is binary, such as
> applications
> # or images, you may want to use "application/octet-stream" instead to
> # keep browsers from trying to display binary files as though they are
> # text.
> #
> DefaultType text/plain
>
> <IfModule mime_module>
>    #
>    # TypesConfig points to the file containing the list of mappings
> from
>    # filename extension to MIME-type.
>    #
>    TypesConfig conf/mime.types
>
>    #
>    # AddType allows you to add to or override the MIME configuration
>    # file specified in TypesConfig for specific file types.
>    #
>    #AddType application/x-gzip .tgz
>    #
>    # AddEncoding allows you to have certain browsers uncompress
>    # information on the fly. Note: Not all browsers support this.
>    #
>    #AddEncoding x-compress .Z
>    #AddEncoding x-gzip .gz .tgz
>    #
>    # If the AddEncoding directives above are commented-out, then you
>    # probably should define those extensions to indicate media types:
>    #
>    AddType application/x-compress .Z
>    AddType application/x-gzip .gz .tgz
>
>    #
>    # AddHandler allows you to map certain file extensions to
> "handlers":
>    # actions unrelated to filetype. These can be either built into
> the server
>    # or added with the Action directive (see below)
>    #
>    # To use CGI scripts outside of ScriptAliased directories:
>    # (You will also need to add "ExecCGI" to the "Options"
> directive.)
>    #
>    #AddHandler cgi-script .cgi
>
>    # For type maps (negotiated resources):
>    #AddHandler type-map var
>
>    #
>    # Filters allow you to process content before it is sent to the
> client.
>    #
>    # To parse .shtml files for server-side includes (SSI):
>    # (You will also need to add "Includes" to the "Options"
> directive.)
>    #
>    #AddType text/html .shtml
>    #AddOutputFilter INCLUDES .shtml
> </IfModule>
>
> #
> # The mod_mime_magic module allows the server to use various hints
> from the
> # contents of the file itself to determine its type.  The
> MIMEMagicFile
> # directive tells the module where the hint definitions are located.
> #
> #MIMEMagicFile conf/magic
>
> #
> # Customizable error responses come in three flavors:
> # 1) plain text 2) local redirects 3) external redirects
> #
> # Some examples:
> #ErrorDocument 500 "The server made a boo boo."
> #ErrorDocument 404 /missing.html
> #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
> #ErrorDocument 402 http://WIN-E36JBVB964M.assfinet.test/subscription_info.html
> #
>
> #
> # EnableMMAP and EnableSendfile: On systems that support it,
> # memory-mapping or the sendfile syscall is used to deliver
> # files.  This usually improves server performance, but must
> # be turned off when serving from networked-mounted
> # filesystems or if support for these functions is otherwise
> # broken on your system.
> #
> #EnableMMAP off
> #EnableSendfile off
>
> # Supplemental configuration
> #
> # The configuration files in the conf/extra/ directory can be
> # included to add extra features or to modify the default
> configuration of
> # the server, or you may simply copy their contents here and change
> as
> # necessary.
>
> # Server-pool management (MPM specific)
> #Include conf/extra/httpd-mpm.conf
>
> # Multi-language error messages
> #Include conf/extra/httpd-multilang-errordoc.conf
>
> # Fancy directory listings
> #Include conf/extra/httpd-autoindex.conf
>
> # Language settings
> #Include conf/extra/httpd-languages.conf
>
> # User home directories
> #Include conf/extra/httpd-userdir.conf
>
> # Real-time info on requests and configuration
> #Include conf/extra/httpd-info.conf
>
> # Virtual hosts
> #Include conf/extra/httpd-vhosts.conf
>
> # Local access to the Apache HTTP Server Manual
> #Include conf/extra/httpd-manual.conf
>
> # Distributed authoring and versioning (WebDAV)
> #Include conf/extra/httpd-dav.conf
>
> # Various default settings
> #Include conf/extra/httpd-default.conf
>
> # Secure (SSL/TLS) connections
> #Include conf/extra/httpd-ssl.conf
> #
> # Note: The following must must be present to support
> #       starting without SSL on platforms with no /dev/random
> equivalent
> #       but a statically compiled-in mod_ssl.
> #
> <IfModule ssl_module>
> SSLRandomSeed startup builtin
> SSLRandomSeed connect builtin
> </IfModule>
>
> Include C:/var/www/reviews.example.com/conf/apache-wsgi.conf
>
>
> ===========================================================
>
>
> C:\var\www\reviews.example.com\conf\apache-wsgi.conf:
> -----------------------------------------------------------
>
> <VirtualHost *:80>
>        ServerName assfinet.test
>        DocumentRoot "C:/var/www/reviews.example.com/htdocs"
>
>        # Error handlers
>        ErrorDocument 500 /errordocs/500.html
>
>        WSGIScriptAlias "/" "C:/var/www/reviews.example.com/htdocs/
> reviewboard.wsgi"
> #        WSGIScriptAlias "/" "C:/var/www/reviews.example.com/htdocs/
> myapp.wsgi"
>
>        <Directory "C:/var/www/reviews.example.com/htdocs">
>                AllowOverride All
> #               Order allow,deny
> #               Allow from all
>        </Directory>
>
>        # Alias static media requests to filesystem
>        Alias /media "C:/var/www/reviews.example.com/htdocs/media"
>        Alias /errordocs "C:/var/www/reviews.example.com/htdocs/errordocs"
> </VirtualHost>
>
>
> ===========================================================
>
>
> C:\var\www\reviews.example.com\htdocs\reviewboard.wsgi:
> -----------------------------------------------------------
>
> import os
> import sys
>
> os.environ['DJANGO_SETTINGS_MODULE'] = "reviewboard.settings"
> os.environ['PYTHON_EGG_CACHE'] = "C:/var/www/reviews.example.com/tmp/
> egg_cache"
> os.environ['HOME'] = "C:/var/www/reviews.example.com/data"
>
> sys.path = ['C:/var/www/reviews.example.com/conf'] + sys.path
>
> import django.core.handlers.wsgi
> application = django.core.handlers.wsgi.WSGIHandler()
>
> --
> Want to help the Review Board project? Donate today at 
> http://www.reviewboard.org/donate/
> Happy user? Let us know at http://www.reviewboard.org/users/
> -~----------~----~----~----~------~----~------~--~---
> To unsubscribe from this group, send email to 
> reviewboard+unsubscr...@googlegroups.com
> For more options, visit this group at 
> http://groups.google.com/group/reviewboard?hl=en

-- 
Want to help the Review Board project? Donate today at 
http://www.reviewboard.org/donate/
Happy user? Let us know at http://www.reviewboard.org/users/
-~----------~----~----~----~------~----~------~--~---
To unsubscribe from this group, send email to 
reviewboard+unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/reviewboard?hl=en

Reply via email to