Hi,

I am using the following softwares,

Reviewboard 1.5
Apache 2.2
Python 2.5

I am only able to see the directory listing in the reviewboard site. I
have done changes in the http.conf and httpd_vhosts.conf. Still I am
not able to figure out why am I not able to see the site.

The contents of http.conf , http_vhosts.conf and apache-modpython.conf
are attached below.

httpd.conf

#
# This is the main Apache HTTP server configuration file.  It contains
the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are
unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for
many
# of the server's control files begin with "/" (or "drive:/" for
Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Software Foundation/
Apache2.2" will be interpreted by the
# server as "C:/Program Files/Apache Software Foundation/Apache2.2/
logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is
located
# will be used by default.  It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile
directive
# at a local disk.  If you wish to share the same ServerRoot for
multiple
# httpd daemons, you will need to change at least LockFile and
PidFile.
#
ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 8080
Listen 8082
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a
DSO you
# have to place corresponding `LoadModule' lines at this location so
the
# directives contained in it are actually available _before_ they are
used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so


#Mychanges
LoadModule python_module modules/mod_python.so

<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon

</IfModule>
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. ad...@your-domain.com
#
ServerAdmin n...@....net

#
# ServerName gives the name and port that the server uses to identify
itself.
# This can often be determined automatically, but we recommend you
specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP
address here.
#
ServerName localhost

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory,
but
# symbolic links and aliases may be used to point to other locations.
#

#DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/
htdocs"

#Mychanges
DocumentRoot "C:\www\clm-review\htdocs"

#
# Each directory to which Apache has access can be configured with
respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
<Directory />
    Options FollowSymLinks
    AllowOverride All
    Order deny,allow
    Deny from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
#<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/
htdocs">
#My changes
<Directory "C:/www/clm-review/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI
MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options
All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please
see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks

    #
    # AllowOverride controls what directives may be placed
in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride ALL

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.html
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from
being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a
<VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error.log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use
with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-
Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-
Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile
Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog "logs/access.log" common

    #
    # If you prefer a logfile with access, agent, and referer
information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog "logs/access.log" combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used
to
    # exist in your server's namespace, but do not anymore. The
client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://J1JC4BS.nsn-intra.net/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server
scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications
and
    # run by the server when requested rather than as documents sent
to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    #ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software
Foundation/Apache2.2/cgi-bin/"

</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock logs/cgisock
</IfModule>

#
# "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin"
should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-
bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

#
# DefaultType: the default MIME type the server will use for a
document
# if it cannot otherwise determine one, such as from filename
extensions.
# If your server contains mostly text or HTML documents, "text/plain"
is
# a good value.  If most of your content is binary, such as
applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings
from
    # filename extension to MIME-type.
    #
    TypesConfig conf/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to
"handlers":
    # actions unrelated to filetype. These can be either built into
the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options"
directive.)
    #
    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the
client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options"
directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints
from the
# contents of the file itself to determine its type.  The
MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://J1JC4BS.nsn-intra.net/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default
configuration of
# the server, or you may simply copy their contents here and change
as
# necessary.

# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf

# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf

# Language settings
#Include conf/extra/httpd-languages.conf

# User home directories
#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf

# Virtual hosts
#Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf

# Various default settings
#Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random
equivalent
#       but a statically compiled-in mod_ssl.
#

#Mychanges
#Include "C:/CLM/review/conf/apache-modpython.conf"

<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>


httpd_vhosts.conf


#
# Virtual Hosts
#
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most
configurations
# use only name-based virtual hosts so the server doesn't need to
worry about
# IP addresses. This is indicated by the asterisks in the directives
below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
NameVirtualHost *:80

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <VirtualHost> block.
#
<VirtualHost *:80>

        ServerName localhost

        DocumentRoot "C:/www"



        # Error handlers

        ErrorDocument 500 /errordocs/500.html



        # Serve django pages

        <Location "/reviews/">

                PythonPath "['C:/www/clm-review/conf'] + sys.path"

                SetEnv DJANGO_SETTINGS_MODULE reviewboard.settings

                SetEnv PYTHON_EGG_CACHE "C:/www/clm-review/tmp/egg_cache"

                SetEnv HOME "C:/www/clm-review/data"

                SetHandler mod_python

                PythonHandler django.core.handlers.modpython

                PythonAutoReload Off

                PythonDebug Off

                # Used to run multiple mod_python sites in the same apache

                PythonInterpreter reviewboard_clm-review

        </Location>



        # Serve static media without running it through mod_python

        # (overrides the above)

        <Location "/reviews/media">

                SetHandler None

        </Location>

        <Location "/reviews/errordocs">

                SetHandler None

        </Location>



        <Directory "C:/www/clm-review/htdocs">

                AllowOverride All

        </Directory>



        # Alias static media requests to filesystem

        Alias /reviews/media "C:/www/clm-review/htdocs/media"

        Alias /reviews/errordocs "C:/www/clm-review/htdocs/errordocs"

</VirtualHost>


apache-modpython.conf


<VirtualHost *:80>

        ServerName j1jc4bs.nsn-intra.net

        DocumentRoot "C:/www/clm-review/htdocs"



        # Error handlers

        ErrorDocument 500 /errordocs/500.html



        # Serve django pages

        <Location "/reviews/">

                PythonPath "['C:/www/clm-review/conf'] + sys.path"

                SetEnv DJANGO_SETTINGS_MODULE reviewboard.settings

                SetEnv PYTHON_EGG_CACHE "C:/www/clm-review/tmp/egg_cache"

                SetEnv HOME "C:/www/clm-review/data"

                SetHandler mod_python

                PythonHandler django.core.handlers.modpython

                PythonAutoReload Off

                PythonDebug Off

                # Used to run multiple mod_python sites in the same apache

                PythonInterpreter reviewboard_clm-review

        </Location>



        # Serve static media without running it through mod_python

        # (overrides the above)

        <Location "/reviews/media">

                SetHandler None

        </Location>

        <Location "/reviews/errordocs">

                SetHandler None

        </Location>



        <Directory "C:/www/clm-review/htdocs">

                AllowOverride All

        </Directory>



        # Alias static media requests to filesystem

        Alias /reviews/media "C:/www/clm-review/htdocs/media"

        Alias /reviews/errordocs "C:/www/clm-review/htdocs/errordocs"

</VirtualHost>


Online there are many links which describe the steps to install
reviewboard on windows with apache.

http://kaistizen.net/EE/index.php/journal/comments/how_to_set_up_review_board_on_windows/

http://code.google.com/p/reviewboard/issues/detail?id=1331

http://waveydavey.wordpress.com/home/computing/installing-review-board-10-alpha-2-on-windows-for-perforce/

I have tried all the above links. But nothing works. And I have not
installed preforce. Is that a problem.??

error log in apache says

[Thu Feb 24 17:17:00 2011] [error] python_init: Python version
mismatch, expected '2.5', found '2.5.4'.
[Thu Feb 24 17:17:00 2011] [error] python_init: Python executable
found 'C:\\Program Files\\Apache Software Foundation\\Apache2.2\\bin\
\httpd.exe'.
[Thu Feb 24 17:17:00 2011] [error] python_init: Python path being used
'C:\\WINDOWS\\system32\\python25.zip;C:\\Python25\\Lib;C:\\Python25\
\DLLs;C:\\Python25\\Lib\\lib-tk;;C:\\Program Files\\Apache Software
Foundation\\Apache2.2\\bin'.
[Thu Feb 24 17:17:00 2011]

Sometimes I het this error

Thu Feb 24 17:17:23 2011] [error] [client 127.0.0.1] File does not
exist: C:/www/clm-review/htdocs/favicon.ico
[Thu Feb 24 17:17:26 2011] [error] [client 127.0.0.1] File does not
exist: C:/www/clm-review/htdocs/favicon.ico
[Thu Feb 24 17:17:26 2011] [error] [client 127.0.0.1] File does not
exist: C:/www/clm-review/htdocs/favicon.ico

When I run the manage.py runserver command.. everything works fine and
I am able to see the site, but I am not able to run ReviewBoard with
apache. I am missing something basic here. Any pointers would be of
great help.



Thanks in advance,
Mahendra Naik

-- 
Want to help the Review Board project? Donate today at 
http://www.reviewboard.org/donate/
Happy user? Let us know at http://www.reviewboard.org/users/
-~----------~----~----~----~------~----~------~--~---
To unsubscribe from this group, send email to 
reviewboard+unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/reviewboard?hl=en

Reply via email to