That’s likely the cause. You’ll need to remove that file or comment it out
and restart Apache.
Christian
On Mon, Feb 19, 2018 at 01:12 Anil Kumar <anilvarm...@gmail.com> wrote:
> Thanks for reply. Below is the VirtualHost section in ssl.cong
>
> <VirtualHost *:443>
>
> # General setup for the virtual host, inherited from global configuration
> #DocumentRoot "/var/www/html"
> #ServerName www.example.com:443
>
> # Use separate log files for the SSL virtual host; note that LogLevel
> # is not inherited from httpd.conf.
> ErrorLog logs/ssl_error_log
> TransferLog logs/ssl_access_log
> LogLevel warn
>
> # SSL Engine Switch:
> # Enable/Disable SSL for this virtual host.
> SSLEngine on
>
> # SSL Protocol support:
> # List the enable protocol levels with which clients will be able to
> # connect. Disable SSLv2 access by default:
> SSLProtocol all -SSLv2
>
> # SSL Cipher Suite:
> # List the ciphers that the client is permitted to negotiate.
> # See the mod_ssl documentation for a complete list.
> SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5:!SEED:!IDEA
>
> # Speed-optimized SSL Cipher configuration:
> # If speed is your main concern (on busy HTTPS servers e.g.),
> # you might want to force clients to specific, performance
> # optimized ciphers. In this case, prepend those ciphers
> # to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
> # Caveat: by giving precedence to RC4-SHA and AES128-SHA
> # (as in the example below), most connections will no longer
> # have perfect forward secrecy - if the server's key is
> # compromised, captures of past or future traffic must be
> # considered compromised, too.
> #SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
> #SSLHonorCipherOrder on
>
> # Server Certificate:
> # Point SSLCertificateFile at a PEM encoded certificate. If
> # the certificate is encrypted, then you will be prompted for a
> # pass phrase. Note that a kill -HUP will prompt again. A new
> # certificate can be generated using the genkey(1) command.
> SSLCertificateFile /etc/pki/tls/certs/xxx00jol.xx.xxxxx.com.crt
> # SSLCertificateFile /etc/pki/tls/certs/localhost.crt
>
> # Server Private Key:
> # If the key is not combined with the certificate, use this
> # directive to point at the key file. Keep in mind that if
> # you've both a RSA and a DSA private key you can configure
> # both in parallel (to also allow the use of DSA ciphers, etc.)
> SSLCertificateKeyFile /etc/pki/tls/private/xxx00jol.xx.xxxxxxx.com.key
> # SSLCertificateKeyFile /etc/pki/tls/private/localhost.key
>
> # Server Certificate Chain:
> # Point SSLCertificateChainFile at a file containing the
> # concatenation of PEM encoded CA certificates which form the
> # certificate chain for the server certificate. Alternatively
> # the referenced file can be the same as SSLCertificateFile
> # when the CA certificates are directly appended to the server
> # certificate for convinience.
> #SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt
>
> # Certificate Authority (CA):
> # Set the CA certificate verification path where to find CA
> # certificates for client authentication or alternatively one
> # huge file containing all of them (file must be PEM encoded)
> #SSLCACertificateFile /etc/pki/tls/certs/ca-bundle.crt
>
> # Client Authentication (Type):
> # Client certificate verification type and depth. Types are
> # none, optional, require and optional_no_ca. Depth is a
> # number which specifies how deeply to verify the certificate
> # issuer chain before deciding the certificate is not valid.
> #SSLVerifyClient require
> #SSLVerifyDepth 10
>
> # Access Control:
> # With SSLRequire you can do per-directory access control based
> # on arbitrary complex boolean expressions containing server
> # variable checks and other lookup directives. The syntax is a
> # mixture between C and Perl. See the mod_ssl documentation
> # for more details.
> #<Location />
> #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
> # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
> # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
> # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
> # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
> # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
> #</Location>
>
> # SSL Engine Options:
> # Set various options for the SSL engine.
> # o FakeBasicAuth:
> # Translate the client X.509 into a Basic Authorisation. This means
> that
> # the standard Auth/DBMAuth methods can be used for access control.
> The
> # user name is the `one line' version of the client's X.509
> certificate.
> # Note that no password is obtained from the user. Every entry in the
> user
> # file needs this password: `xxj31ZMTZzkVA'.
> # o ExportCertData:
> # This exports two additional environment variables: SSL_CLIENT_CERT
> and
> # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
> # server (always existing) and the client (only existing when client
> # authentication is used). This can be used to import the certificates
> # into CGI scripts.
> o StdEnvVars:
> # This exports the standard SSL/TLS related `SSL_*' environment
> variables.
> # Per default this exportation is switched off for performance reasons,
> # because the extraction step is an expensive operation and is usually
> # useless for serving static content. So one usually enables the
> # exportation for CGI and SSI requests only.
> # o StrictRequire:
> # This denies access when "SSLRequireSSL" or "SSLRequire" applied even
> # under a "Satisfy any" situation, i.e. when it applies access is
> denied
> # and no other module can change it.
> # o OptRenegotiate:
> # This enables optimized SSL connection renegotiation handling when SSL
> # directives are used in per-directory context.
> #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
> <Files ~ "\.(cgi|shtml|phtml|php3?)$">
> SSLOptions +StdEnvVars
> </Files>
> <Directory "/var/www/cgi-bin">
> SSLOptions +StdEnvVars
> </Directory>
>
> # SSL Protocol Adjustments:
> # The safe and default but still SSL/TLS standard compliant shutdown
> # approach is that mod_ssl sends the close notify alert but doesn't wait
> for
> # the close notify alert from client. When you need a different shutdown
> # approach you can use one of the following variables:
> # o ssl-unclean-shutdown:
> # This forces an unclean shutdown when the connection is closed, i.e.
> no
> # SSL close notify alert is send or allowed to received. This violates
> # the SSL/TLS standard but is needed for some brain-dead browsers. Use
> # this when you receive I/O errors because of the standard approach
> where
> # mod_ssl sends the close notify alert.
> # o ssl-accurate-shutdown:
> # This forces an accurate shutdown when the connection is closed, i.e.
> a
> # SSL close notify alert is send and mod_ssl waits for the close notify
> # alert of the client. This is 100% SSL/TLS standard compliant, but in
> # practice often causes hanging connections with brain-dead browsers.
> Use
> # this only for browsers where you know that their SSL implementation
> # works correctly.
> # Notice: Most problems of broken clients are also related to the HTTP
> # keep-alive facility, so you usually additionally want to disable
> # keep-alive for those clients, too. Use variable "nokeepalive" for this.
> # Similarly, one has to force some clients to use HTTP/1.0 to workaround
> # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
> # "force-response-1.0" for this.
> BrowserMatch "MSIE [2-5]" \
> nokeepalive ssl-unclean-shutdown \
> downgrade-1.0 force-response-1.0
>
> # Per-Server Logging:
> # The home of a custom SSL log file. Use this when you want a
> # compact non-error SSL logfile on a virtual host basis.
> CustomLog logs/ssl_request_log \
> "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
>
> </VirtualHost>
>
>
>
> -Anil
>
> On Saturday, February 17, 2018 at 3:40:40 PM UTC+5:30, Christian Hammond
> wrote:
>
>> Can you show me what that VirtualHost looks like?
>>
>> Christian
>>
> On Fri, Feb 16, 2018 at 3:49 AM, Anil Kumar <anilv...@gmail.com> wrote:
>>
> I have found one file in /ect/httpd/conf.d/ssl.conf with VirtualHost for
>>> 433. Do I need to overwrite with reviewboard changes?
>>> -Anil
>>>
>>> On Friday, February 16, 2018 at 2:21:27 PM UTC+5:30, Anil Kumar wrote:
>>>
>>>> Hi All,
>>>>
>>>> When I access ReviewBoard using https, it's always showing Apache 2
>>>> Test Page, not ReviewBoard page. Http is working fine.
>>>> Any reason why it's showing up Apache 2 Test Page with https.
>>>>
>>>> -Anil
>>>>
>>> --
>>> Supercharge your Review Board with Power Pack:
>>> https://www.reviewboard.org/powerpack/
>>> Want us to host Review Board for you? Check out RBCommons:
>>> https://rbcommons.com/
>>> Happy user? Let us know! https://www.reviewboard.org/users/
>>> ---
>>> You received this message because you are subscribed to the Google
>>> Groups "Review Board Community" group.
>>>
>> To unsubscribe from this group and stop receiving emails from it, send an
>>> email to reviewboard...@googlegroups.com.
>>>
>>
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>>
>>
>>
>> --
>> Christian Hammond
>> President/CEO of Beanbag <https://www.beanbaginc.com/>
>> Makers of Review Board <https://www.reviewboard.org/>
>>
> --
> Supercharge your Review Board with Power Pack:
> https://www.reviewboard.org/powerpack/
> Want us to host Review Board for you? Check out RBCommons:
> https://rbcommons.com/
> Happy user? Let us know! https://www.reviewboard.org/users/
> ---
> You received this message because you are subscribed to the Google Groups
> "Review Board Community" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to reviewboard+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>
--
--
Christian Hammond
President/CEO of Beanbag
Makers of Review Board
--
Supercharge your Review Board with Power Pack:
https://www.reviewboard.org/powerpack/
Want us to host Review Board for you? Check out RBCommons:
https://rbcommons.com/
Happy user? Let us know! https://www.reviewboard.org/users/
---
You received this message because you are subscribed to the Google Groups
"Review Board Community" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to reviewboard+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
