Thanks in advance. On the Altera SoC Evaluation Board -->
So, I'm using GSRD 16.1 SD card image to set up my QSPI for boot. I got all the needed files but when I go to erase the flash I get the following: root@cyclone5:~/sdcard/8Sept17-QSPIfiles# ls -al drwxr-xr-x 2 root root 4096 Sep 8 2017 . drwxr-xr-x 4 root root 4096 Jan 1 1970 .. -rwxr-xr-x 1 root root 11796480 Sep 8 2017 altera-image-minimal-socfpga_cyclone5.jffs2 -rwxr-xr-x 1 root root 262144 Sep 8 2017 preloader-mkpimage.bin -rwxr-xr-x 1 root root 2352556 Sep 8 2017 soc_system.rbf -rwxr-xr-x 1 root root 25252 Sep 8 2017 socfpga.dtb -rwxr-xr-x 1 root root 258088 Sep 8 2017 u-boot-socfpga_cyclone5.img -rwxr-xr-x 1 root root 4051904 Oct 31 2016 zImage root@cyclone5:~/sdcard/8Sept17-QSPIfiles# flash_erase /dev/mtd0 0 0 -sh: flash_erase: command not found root@cyclone5:~/sdcard/8Sept17-QSPIfiles# mtd_debug -sh: mtd_debug: command not found root@cyclone5:~/sdcard/8Sept17-QSPIfiles# flash_erase /dev/mtd0 0 0 WHAT DO I HAVE TO ADD TO THE LINUX KERNEL to enable flash_erase, etc. ? Or what am I missing ?? I built the default zImage too and tried it. Janet _______________________________________________ Rfi mailing list Rfi@lists.rocketboards.org http://lists.rocketboards.org/cgi-bin/mailman/listinfo/rfi
