On 14/09/2017 07:05, Janet Estabridis wrote:
Phil,
So I'm not really good at this stuff - Would it be possible for you to give me a little
help/instructions with "Just add the altera layer:
https://github.com/kraj/meta-altera/tree/master/recipes-kernel/linux";
Thanks,
Janet
G'day Janet,
It's a bit of a moving target and depends on what version you are targeting.
this has some tips.
https://rocketboards.org/foswiki/Documentation/YoctoDoraBuildWithMetaAltera
There's also some books: eg
https://www.amazon.com/Embedded-Linux-Projects-Project-Cookbook/dp/1784395188
----- Original Message -----
From: "Phil Reid" <pr...@electromag.com.au>
To: "Janet Estabridis" <jpe1...@mchsi.com>, "rfi" <rfi@lists.rocketboards.org>
Sent: Sunday, September 10, 2017 4:28:00 PM
Subject: Re: [Rfi] Yocto Source Package
On 9/09/2017 01:09, Janet Estabridis wrote:
Thanks in advance.
So, I'm wanting to boot from the QSPI on my Altera SoC Cyclone V Evaluation
board. I'm at GSRD v16.1 and the only instructions I have found are for GSRD
v13.1 - Booting from QSPI which refers to GSRD v13.1 Using Yocto Source Package.
My question is -- is it still valid to use the 2013.11 Yocto Source Package?
I went to http://releases.rocketboards.org/release and did not see any other
"linux-socfpga-gsrd-XX.X-src.bsx" files or did I just miss it?
I'm using angstrom 2016.16
Just add the altera layer:
https://github.com/kraj/meta-altera/tree/master/recipes-kernel/linux
Or roll your own.
The mainline kernel / uboot pretty much has everything needed for the C-V's now.
--
Regards
Phil Reid
ElectroMagnetic Imaging Technology Pty Ltd
Development of Geophysical Instrumentation & Software
www.electromag.com.au
3 The Avenue, Midland WA 6056, AUSTRALIA
Ph: +61 8 9250 8100
Fax: +61 8 9250 7100
Email: pr...@electromag.com.au
_______________________________________________
Rfi mailing list
Rfi@lists.rocketboards.org
http://lists.rocketboards.org/cgi-bin/mailman/listinfo/rfi
