Thats the thing, the native vlan is a different vlan. Native is also untagged, all the other allowed vlans are tagged. If I create a single interface tagged on a non-native allowed vlan it works. However creating multiple tagged aliases is unclear, and I have not made it work yet.
On 7/18/07, Jack Neely <[EMAIL PROTECTED]> wrote:
On Tue, Jul 17, 2007 at 02:33:02PM -0400, [EMAIL PROTECTED] wrote: > X-Posted to the regular redhat list. > > So I have a small issue. I have a machine with two interfaces, one on vlan X > and one on vlan Y. I need 4 aliases on vlan X so I have eth0, trying to > create the four aliases using the standard vlan configuration does not work. > Creating config files names eth0: 1.X does nothing, the files get ignored. > Using the same config file with a different interface name works ( eth0.X), I > have also tried doing eth0.X:1 and that does nothing either. > > So in short is there a way to either tag all of the traffic on a NIC (ie > eth0) or to have multiple aliases on the same vlan ? The vlan tagging wont work unless the switch you are connected to is configured to trunk those vlans to your server. If you've got two NICs attached to two different vlans its most likely setup so that you just see the two different networks and don't need to bother with any vlan magic. So creating eth0:1, eth0:2 should work fine for getting aliases on vlan X. Jack Neely -- Jack Neely <[EMAIL PROTECTED]> NCSU Campus Linux Services Lead Information Technology Division, NC State University GPG Fingerprint: 1917 5AC1 E828 9337 7AA4 EA6B 213B 765F 3B6A 5B89 _______________________________________________ rhelv5-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/rhelv5-list
_______________________________________________ rhelv5-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/rhelv5-list
