On Tue, 2007-11-20 at 10:33 +0200, Pasi Kärkkäinen wrote: > I think you need to load ioctl module for qla4xxx called "qisioctl". The > qlogic vendor driver includes this functionality "out of the box".
Thanks for the info Pasi. I actually already had the qisioctl module installed, but it wasn't working. It turns out that on this machine there seems to be some conflict between the iqlremote agent and the qisioctl module. When I use the Qlogic qla4xxx driver I can run the iqlremote agent which allows me to configure the HBA via the SANsurfer GUI interface. I can also use the iscli command line interface. When I use the stock RHEL5.1 qla4xxx driver with qisioctl I can use the iscli interface as well. If I attempt to start the iqlremote server, the service starts and seems to be attempting to work, but SANsurfer will not correctly connect to the device and it even interferes with the operation of iscli with the symptom of randomly failing to allow access to one or two of the iscsi ports (this machine has 4). This sounds like it is probably a problem with qisioctl so I'll take it up with Qlogic. In the meantime, when running with the stock qla4xxx driver we have not been able to reproduce the corruption. Thanks, Tom _______________________________________________ rhelv5-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/rhelv5-list
