Ian,
That link was most helpful!

Suggestion to any RedHat ears listening here, this procedure is *far* less
intuitive than it could be. Given disks are nearly free these days, how
about giving us RAID with a dramatically reduced installation workload for
us non-guru's.

Bill Watson
[EMAIL PROTECTED]

PS: Here is a snapshot of my recent "sar -d 10 1" stat's with apparently
happy disk drives.
Average:          DEV       tps  rd_sec/s  wr_sec/s  avgrq-sz  avgqu-sz
await     svctm     %util
Average:       dev8-0    214.54      0.00  54707.32    254.99     91.16
411.12      3.23     69.32
Average:      dev8-16    214.54      0.00  54707.32    254.99     91.15
411.08      3.23     69.32
Average:      dev8-32    413.84  99827.48      4.81    241.23      1.78
4.30      2.17     89.75
Average:       dev9-1  11510.23      0.00  92081.85      8.00      0.00
0.00      0.00      0.00
Average:       dev9-0      0.00      0.00      0.00      0.00      0.00
0.00      0.00      0.00
Command:
[EMAIL PROTECTED] ~]# dd if=/u/installers/hh.cpio of=/hh.o bs=16384k
1091+1 records in
1091+1 records out
18304431616 bytes (18 GB) copied, 427.332 seconds, 42.8 MB/s

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of [EMAIL PROTECTED]
Sent: Friday, April 18, 2008 11:36 AM
To: [email protected]
Subject: RE: [rhelv5-list] RHEL 5.1 install w/ software RAID


I have found this to be helpful..it's for fedora so it should be pretty
close and has some good screenshots... http://www.ping.co.il/node/1

Ian







-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Bill Watson
Sent: Friday, April 18, 2008 12:19 PM
To: 'Red Hat Enterprise Linux 5 (Tikanga) discussion mailing-list'
Subject: [rhelv5-list] RHEL 5.1 install w/ software RAID

Does anyone have a monkey-see monkey-do click list for setting up software
raid during installation of RHEL 5.1?

I have 2 drives (sda2,sdb1) (not sure why a2 isn't a1) that are identical
and I wish to put /boot and / on them. I have a 3rd drive (sdc1) I want to
put /u and /swap onto.

I simply want sda2 and sdb1 to be a RAID 1 mirror, covering as much of the
Opsys as s/w RAID will allow.

If anybody has any such checklist for any configuration I could most likely
tailor it to my needs. It's just I have no monkey-see list to adapt.

Bill Watson
[EMAIL PROTECTED]

_______________________________________________
rhelv5-list mailing list
[email protected] https://www.redhat.com/mailman/listinfo/rhelv5-list

_______________________________________________
rhelv5-list mailing list
[email protected] https://www.redhat.com/mailman/listinfo/rhelv5-list


_______________________________________________
rhelv5-list mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/rhelv5-list

Reply via email to