Am 25.03.2010 11:58, schrieb Alexander Dalloz:
Hi,
is there a way to set routing infos for a network device -
if I have changed e.g.
/etc/sysconfig/network-scripts/route-eth1
?
route-ethX must contain "ip route add" syntax instructions ...
How come? Has it changed?
Here is a working example:
# cat /etc/sysconfig/network-scripts/route-eth1
ADDRESS0=192.168.200.0
NETMASK0=255.255.255.0
GATEWAY0=192.168.100.1
ADDRESS1=192.168.101.0
NETMASK1=255.255.255.0
GATEWAY1=192.168.100.1
I know I can bring down/up eth1 with ifdown/ifup, but I'd rather do this
in another way.
... so without bringing down&& up the device you can just do
while read line;
do ip route add ${line}
done< /etc/sysconfig/network-scripts/route-eth1
Umm no, not with my working syntax.
Thx
Rainer
_______________________________________________
rhelv5-list mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/rhelv5-list
