> Hello, I am attempting to create a 4 node riak installation on 4 > separate CentOS servers. Installation of Riak went well. We have run > simple tests like riak ping, sudo curl \-v > http://127.0.0.1:8098/riak/test, ect, and everything seems fine with the ^^^^^^^^^^^^^^^^^^^
Did you change your http address from 127.0.0.1 to 10.1.78.9? On that machine, 10.1.78.9, does curl -v http://10.1.78.9:8098/riak/test work? > riak servers, they all start up with no errors. We used the default > ports in the app.config files. Ie: epmd listener: TCP:4369 > handoff_port listener: TCP:8099 > web_port: TCP:8098 > pb_port: TCP:8087 > > We have updated all ip addresses in the config files as instructed on the > riak site. Also, we have verified by telnet that the ports are all open > and that I can telnet between the riak servers. Still after all of > that, when I try to do a cluster command I get the following response: > > > [root@essd-riak-test-server ~]# riak-admin cluster join [email protected] > Attempting to restart script through sudo -H -u riak > Node [email protected] is not reachable! > [root@essd-riak-test-server ~]# > > I have been stuck on this issue for quite a while and tried everything I > found on the riak web site to resolve this. Any help you could offer > would greatly be appreciated. Thanks in advance. > > Sincerely, > > James Sweeney _______________________________________________ riak-users mailing list [email protected] http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
