VPC is not a requirement, although it is definitely recommended for greenfield projects.
-- Hector On September 16, 2013 at 12:46:10 AM, David Montgomery ([email protected]) wrote: I am not using VPC. Is using VPC required? On Mon, Sep 16, 2013 at 12:16 AM, Jeremiah Peschka <[email protected]> wrote: Welp, here's what I did and it seemed to work for me: Created a new VPC Created a subnet in said VPC Created a default route for SSH connectivity Created a security group with the TCP/IP settings outline in the AWS PDF Created two instances using the Riak AMI, both inside the VPC. On each instance, I edited app.config to listen on the local IP address (found using curl http://169.254.169.254/latest/meta-data/local-ipv4) On the first instance, I started riak and was able to ping the node successfully from the local host and from instance two. On the second instance I started riak and then ran the following - http://pastebin.com/CaHH3Eve Each node's vm.args is using the IP address for the `-name` parameter. If you're in a VPC, you may want to check the box for "Enable DNS hostname support for instances launched in this VPC." --- Jeremiah Peschka - Founder, Brent Ozar Unlimited MCITP: SQL Server 2008, MVP Cloudera Certified Developer for Apache Hadoop On Sun, Sep 15, 2013 at 6:39 AM, David Montgomery <[email protected]> wrote: Its both the fqdn or internal ip address. Either way,,,,same issue riak refuses to work with ip address or fqdn....and I dont know why. on bash page the recommend using fqdn which adds to tbhe confusion http://docs.basho.com/riak/latest/ops/building/basic-cluster-setup/ Node Names Use fully qualified domain names (FQDNs) rather than IP addresses for the cluster member node names. For example, “[email protected]” and “[email protected]” are both acceptable node naming schemes, but using the FQDN style is preferred. Once a node has been started, in order to change the name you must either remove ring files from the data directory, riak-admin reip the node, or riak-admin cluster force-replace the node. On Sun, Sep 15, 2013 at 9:10 PM, Jeremiah Peschka <[email protected]> wrote: Starting on page 3, the Riak on AWS [1] whitepaper has some instructions on getting things set up. In the docs, they recommend using the AWS internal IP address instead of the FQDN. This advice is also repeated in the Riak wiki [2]. [1]: http://media.amazonwebservices.com/AWS_NoSQL_Riak.pdf [2]: http://docs.basho.com/riak/latest/ops/building/installing/aws-marketplace/ --- Jeremiah Peschka - Founder, Brent Ozar Unlimited MCITP: SQL Server 2008, MVP Cloudera Certified Developer for Apache Hadoop On Sun, Sep 15, 2013 at 1:06 AM, David Montgomery <[email protected]> wrote: Hi, I am having a very difficult time installing riak on ec2. To start ...I cant get past using private ip address or private dns when setting vm.args -name [email protected] root@ip-10-234-117-74:/home/ubuntu# hostname --fqdn ip-10-234-117-74.eu-west-1.compute.internal riak start riak ping Node '[email protected]' not responding to pings. When I use 127.0.0.1 and then I run riak start then works. riak start root@ip-10-234-117-74:/etc/riak# riak ping pong I am using m1.large on ubuntu 12.04 and the latest version of riak How does one get past this point? _______________________________________________ riak-users mailing list [email protected] http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com _______________________________________________ riak-users mailing list [email protected] http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com _______________________________________________ riak-users mailing list [email protected] http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com _______________________________________________ riak-users mailing list [email protected] http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
_______________________________________________ riak-users mailing list [email protected] http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
