> Hi Guillaume, > > On 29.03.2016 22:56, Guillaume Roguez wrote: >>> I've just updated my asterisk PBX to version 13. Used the exact same >>> configuration as with asterisk 11 and the 'regular' aka non-soft phones all >>> work fine (couple of snoms, different models). Only my ring soft-phone >>> doesn't >>> play audio on trunk calls any more after the update. Internal calls are >>> fine. >>> I've reverted back to asterisk 11 for now, but does anyone have an idea >>> where to >>> start debugging in this case? >>> >> >> Two ways: >> - from asterisk itself: go to asterisk console and enable sip debug logs to >> see >> what's happening when calling with Ring. >> - from Ring: take a look to your syslog messages and find dring debug line >> when >> it output SIP sdp. Check what's kind of audio codec choosen after >> negotiation. >> >> Another idea: >> If your server acts like RTP stream proxy, check that nothing (port range?) >> is >> blocked: you can use the wireshark application on both ends for that. > > It's fixed after I added the 't' option to the dial command. It's only an > issue > with ring (I double and triple checked) so I don't really understand what's > going on. > Anyway, working now :)
Thanks for the report, we're going to add that in our bug tracker Tuleap to see if we can reproduce the problem in our lab. Note: as you, I don't see why 't' option help to fix your issue... https://wiki.asterisk.org/wiki/display/AST/Asterisk+11+Application_Dial -guillaume _______________________________________________ Ring mailing list Ring@lists.savoirfairelinux.net https://lists.savoirfairelinux.net/mailman/listinfo/ring