Is the probe able to get an IP via DHCP?
I have found that when you format the USB drive it looks for a DHCP server to get an IP before it will download the firmware, once it has formatted the USB drive it will then pull down the static IP configuration from the Atlas servers.

On 11/10/16 06:56, Yang Yu wrote:
On Tue, Oct 11, 2016 at 12:52 AM, Budiwijaya <> wrote:
Usually, I formatted the disk to FAT32.
Let the probe on and connected to internet for about 1/2 hour.
In my case it has been on for much longer than an hour, still not even
an SOS message.

Does the probe stop sending SOS once the USB stick without firmware is inserted?


Reply via email to