I am an idiot. The TTY device is, of course, not ttyS0 but /dev/ttyS0 . Then it works perfectly.
Rob On Fri, 30 Sep 2011, Rob Landry wrote: > > Has anyone got one of these working with Rivendell? > > According to SWITCHERS.txt, I'm supposed to set the baud rate to 19200, > and put the switcher in MIX mode. > > I can get the switcher to work using minicom, so my hardware is OK. > > In rdadmin, under Manage Hosts, under opheodrys (my host name), uner > Sitchers/GPIO, I've added a Broadcast Tools ACS 8.2. as matrix 1. > > Under Serial Ports, I have Serial0 endbled with the following settings: > > TTY device: ttyS0 > Baud rate: 19200 > Parity: None > Data bits: 8 > Stop bits: 1 > Terminator: None > > In rdlibrary, I've created a macro cart 999021 with the following line: > > ST 1 2 1! > > If I understand the instructions right, that should tell the switcher to > connect input #2 to output #1. However, it doesn't work. > > Have I forgotten something? > > > Rob > _______________________________________________ > Rivendell-dev mailing list > [email protected] > http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev > _______________________________________________ Rivendell-dev mailing list [email protected] http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
